fabric v1.4 kafka模式(未開啟TLS)，多節點服務器部署，實現動態添加組織

發布時間：2020-06-10 14:19:58 來源：網絡閱讀：3921 作者：yikayi 欄目：大數據

fabric v1.4 kafka模式(未開啟TLS)，多節點服務器部署，實現動態添加組織

一、環境準備

? ? 這里采用阿里云ECS主機(2核4G，生產環境按實際環境提升配置)

? ? 必須指定hostsname

? ? fabric官網 github https://github.com/hyperledger/fabric

? ? centos7 x64

fabric v1.4 kafka模式(未開啟TLS)，多節點服務器部署，實現動態添加組織

1.所有節點服務器指定如下hosts(含后續新增組織，也必須同步所有hosts)

172.31.1.89 zookeeper0

172.31.1.90 zookeeper1

172.31.1.91 zookeeper2

172.31.1.89 kafka0

172.31.1.90 kafka1

172.31.1.91 kafka2

172.31.1.92 kafka3

172.31.1.89 orderer0.example.com

172.31.1.90 orderer1.example.com

172.31.1.91 orderer2.example.com

172.31.1.89 peer0.org1.example.com

172.31.1.90 peer1.org1.example.com

172.31.1.91 peer0.org2.example.com

172.31.1.92 peer1.org2.example.com

;;;##后續模擬新增org3組織-備用

172.31.1.101 peer0.org2.example.com

172.31.1.102 peer1.org2.example.com

2.環境初始(所有節點服務均部署)

? #####注意！注意！注意！說三遍########

? 阿里云ECS 注釋(options timeout:2 attempts:3 rotate single-request-reopen)，不然會報錯

? # vim /etc/resolv.conf

? ;options timeout:2 attempts:3 rotate single-request-reopen

? nameserver 100.100.2.136

? nameserver 100.100.2.138

? #######注意！注意！注意！說三遍##########

? 1)關閉防火墻（或開放端口）、selinux

??systemctl?disable?firewalld.service
??systemctl?stop?firewalld.service

? 2)安裝配置docker(17.06.2-ce or later)

????????#?step?1:?安裝必要的一些系統工具
????????yum?install?-y?yum-utils?device-mapper-persistent-data?lvm2
????????#?Step?2:?添加軟件源信息
????????yum-config-manager?--add-repo?http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
????????#?Step?3:?更新并安裝?Docker-CE
????????yum?makecache?fast
????????yum?list?docker-ce?--showduplicates?|?sort?-r
????????#安裝指定docker?版本?
????????yum?install?docker-ce-17.12.0.ce-1.el7.centos
????????#?Step?4:?開啟Docker服務
????????service?docker?start
????????systemctl?enable?docker.service

? 3)docker-compose(1.14.0 or later)

????????#下載docker-compose
????????#?curl?-L?"https://github.com/docker/compose/releases/download/1.24.1/docker-compose-$(uname?-s)-$(uname?-m)"?-o?/usr/local/bin/docker-compose
????????#為docker-compose配置執行權限
????????#chmod?+x?/usr/local/bin/docker-compose
????????#檢查是否安裝成功
????????#docker-compose?-v

? 4)git、go(version 1.10.x)

????????#下載安裝git
????????#yum?install?git?-y
????????#go安裝下載，預先創建/opt/soft/(后續存配置文件)、/opt/gopath(存放fabric源代碼)
????????#mkdir?-p?/opt/gopath
????????#mkdir?/opt/soft/?
????????#?國外地址
????????#wget?https://storage.googleapis.com/golang/go1.10.linux-amd64.tar.gz
????????#?國內地址
????????#wget?https://studygolang.com/dl/golang/go1.10.linux-amd64.tar.gz
????????#?解壓
????????#tar?-C?/usr/local/?-xzvf?go1.10.linux-amd64.tar.gz
????????#?配置環境變量
????????#vi?/etc/profile
????????????????添加如下
????????????????#?go?env
????????????????export?PATH=$PATH:/usr/local/go/bin
????????????????export?GOPATH=/opt/gopath
????????#?生效配置
????????source?/etc/profile
????????#?查看配置
????????go?version

? 5)域名ip映射(/etc/hosts),如開篇設置

二、生成配置信息

? ####以下操作均在第一節點服務器 172.31.1.89

? 1.下載Hyperledger Fabric 源碼? ?

? # 下載 Fabric 源碼, 源碼中 import 的路徑為github.com/hyperledger/fabric ,所以我們要按照這個路徑

#mkdir?-p?/opt/gopath/src/github.com/hyperledger
??#cd?/opt/gopath/src/github.com/hyperledger
??#git?clone?https://github.com/hyperledger/fabric
??[root@xxxx?fabric]#?pwd
??/opt/gopath/src/github.com/hyperledger/fabric
??[root@xxxxx?fabric]#?ll
??total?1412
??.................省略部分
??drwxr-xr-x??6?root?root???4096?Aug?25?02:06?msp
??drwxr-xr-x??6?root?root???4096?Aug?25?02:06?orderer
??drwxr-xr-x?13?root?root???4096?Aug?29?12:48?peer
??drwxr-xr-x?14?root?root???4096?Aug?25?02:06?protos
??-rw-r--r--??1?root?root???7303?Aug?25?02:06?README.md
??drwxr-xr-x??3?root?root???4096?Aug?25?02:06?release
??drwxr-xr-x??2?root?root???4096?Aug?25?02:06?release_notes
??drwxr-xr-x??3?root?root???4096?Aug?25?02:06?sampleconfig
??drwxr-xr-x??2?root?root???4096?Aug?25?02:06?scripts
??-rw-r--r--??1?root?root????316?Aug?25?02:06?settings.gradle
??-rw-r--r--??1?root?root???3816?Aug?25?02:06?testingInfo.rst
??-rw-r--r--??1?root?root?438053?Aug?25?02:06?test-pyramid.png
??drwxr-xr-x??8?root?root???4096?Aug?25?02:06?token
??-rw-r--r--??1?root?root????495?Aug?25?02:06?tox.ini
??drwxr-xr-x??2?root?root???4096?Aug?25?02:06?unit-test
??drwxr-xr-x??9?root?root???4096?Aug?25?02:06?vendor

? 2.生成 Hyperledger Fabric 證書，證書生成只需要生成一次

??#?下載官方證書生成軟件工具(均為二進制文件)
??#進入目錄
??#cd?/opt/soft
??#工具為1.4版本：wget?https://nexus.hyperledger.org/content/repositories/releases/org/hyperledger/fabric/hyperledger-fabric/linux-amd64-1.4.0/hyperledger-fabric-linux-amd64-1.4.0.tar.gz
??#解壓
???tar?zxvf?hyperledger-fabric-linux-amd64-1.4.0.tar.gz
??#?解壓后是?一個?bin?與?一個?config?目錄
??[root@xxxx?bin]#?tree?
????????├──?configtxgen
????????├──?configtxlator
????????├──?cryptogen
????????├──?get-docker-images.sh
????????├──?orderer
????????└──?peer
????????
??#?設置環境變量
??vi?/etc/profile
??#?fabric?env
??export?PATH=$PATH:/opt/soft/bin
??#?使文件生效
??source?/etc/profile

? # 從git(release-1.3版本)下載，或者從其他途徑下載默認 configtx.yaml 、crypto-config.yaml ，并上傳至/opt/soft目錄，待修改

? ?配置文件在目錄下 https://github.com/hyperledger/fabric/tree/release-1.3/examples/e2e_cli?

? ###編輯修改crypto-config.yaml 如下(主要修改組織區域與增加orderer)：

#?Copyright?IBM?Corp.?All?Rights?Reserved.
#
#?SPDX-License-Identifier:?Apache-2.0
#
#?---------------------------------------------------------------------------
#?"OrdererOrgs"?-?Definition?of?organizations?managing?orderer?nodes
#?---------------------------------------------------------------------------
OrdererOrgs:
??#?---------------------------------------------------------------------------
??#?Orderer
??#?---------------------------------------------------------------------------
??-?Name:?Orderer
????Domain:?example.com
????CA:
????????Country:?CN
????????Province:?GuangDong
????????Locality:?ShenZhen
????#?---------------------------------------------------------------------------
????#?"Specs"?-?See?PeerOrgs?below?for?complete?description
????#?---------------------------------------------------------------------------
????Specs:
??????-?Hostname:?orderer0
??????-?Hostname:?orderer1
??????-?Hostname:?orderer2
#?---------------------------------------------------------------------------
#?"PeerOrgs"?-?Definition?of?organizations?managing?peer?nodes
#?---------------------------------------------------------------------------
PeerOrgs:
??#?---------------------------------------------------------------------------
??#?Org1
??#?---------------------------------------------------------------------------
??-?Name:?Org1
????Domain:?org1.example.com
????EnableNodeOUs:?true
????CA:
????????Country:?CN
????????Province:?GuangDong
????????Locality:?ShenZhen
????#?---------------------------------------------------------------------------
????#?"Specs"
????#?---------------------------------------------------------------------------
????#?Uncomment?this?section?to?enable?the?explicit?definition?of?hosts?in?your
????#?configuration.??Most?users?will?want?to?use?Template,?below
????#
????#?Specs?is?an?array?of?Spec?entries.??Each?Spec?entry?consists?of?two?fields:
????#???-?Hostname:???(Required)?The?desired?hostname,?sans?the?domain.
????#???-?CommonName:?(Optional)?Specifies?the?template?or?explicit?override?for
????#?????????????????the?CN.??By?default,?this?is?the?template:
????#
????#??????????????????????????????"{{.Hostname}}.{{.Domain}}"
????#
????#?????????????????which?obtains?its?values?from?the?Spec.Hostname?and
????#?????????????????Org.Domain,?respectively.
????#?---------------------------------------------------------------------------
????#?Specs:
????#???-?Hostname:?foo?#?implicitly?"foo.org1.example.com"
????#?????CommonName:?foo27.org5.example.com?#?overrides?Hostname-based?FQDN?set?above
????#???-?Hostname:?bar
????#???-?Hostname:?baz
????#?---------------------------------------------------------------------------
????#?"Template"
????#?---------------------------------------------------------------------------
????#?Allows?for?the?definition?of?1?or?more?hosts?that?are?created?sequentially
????#?from?a?template.?By?default,?this?looks?like?"peer%d"?from?0?to?Count-1.
????#?You?may?override?the?number?of?nodes?(Count),?the?starting?index?(Start)
????#?or?the?template?used?to?construct?the?name?(Hostname).
????#
????#?Note:?Template?and?Specs?are?not?mutually?exclusive.??You?may?define?both
????#?sections?and?the?aggregate?nodes?will?be?created?for?you.??Take?care?with
????#?name?collisions
????#?---------------------------------------------------------------------------
????Template:
??????Count:?2
??????#?Start:?5
??????#?Hostname:?{{.Prefix}}{{.Index}}?#?default
????#?---------------------------------------------------------------------------
????#?"Users"
????#?---------------------------------------------------------------------------
????#?Count:?The?number?of?user?accounts?_in?addition_?to?Admin
????#?---------------------------------------------------------------------------
????Users:
??????Count:?1
??#?---------------------------------------------------------------------------
??#?Org2:?See?"Org1"?for?full?specification
??#?---------------------------------------------------------------------------
??-?Name:?Org2
????Domain:?org2.example.com
????EnableNodeOUs:?true
????CA:
????????Country:?CN
????????Province:?GuangDong
????????Locality:?ShenZhen
????Template:
??????Count:?2
????Users:
??????Count:?1
??
??#用cryptogen?工具執行生成相應的證書
??[root@xxxx?soft]#?cryptogen?generate?--config=./crypto-config.yaml
??org1.example.com
??org2.example.com

? # 生成一個 crypto-config 證書目錄

? # 可用 tree crypto-config 查看

? #生成 Hyperledger Fabric 創世區塊

? #/opt/soft目錄下創建channel-artifacts，存放生成塊信息

? [root@xxxx soft]# mkdir -p /opt/soft/channel-artifacts

? # 編輯修改configtx.yaml(orderer 多節點 peer 多節點),如下：

#?Copyright?IBM?Corp.?All?Rights?Reserved.
#
#?SPDX-License-Identifier:?Apache-2.0
#
---
################################################################################
#
#???Section:?Organizations
#
#???-?This?section?defines?the?different?organizational?identities?which?will
#???be?referenced?later?in?the?configuration.
#
################################################################################
Organizations:
????#?SampleOrg?defines?an?MSP?using?the?sampleconfig.??It?should?never?be?used
????#?in?production?but?may?be?used?as?a?template?for?other?definitions
????-?&OrdererOrg
????????#?DefaultOrg?defines?the?organization?which?is?used?in?the?sampleconfig
????????#?of?the?fabric.git?development?environment
????????Name:?OrdererOrg
????????#?ID?to?load?the?MSP?definition?as
????????ID:?OrdererMSP
????????#?MSPDir?is?the?filesystem?path?which?contains?the?MSP?configuration
????????MSPDir:?crypto-config/ordererOrganizations/example.com/msp
????????#?Policies?defines?the?set?of?policies?at?this?level?of?the?config?tree
????????#?For?organization?policies,?their?canonical?path?is?usually
????????#???/Channel/<Application|Orderer>/<OrgName>/<PolicyName>
????????Policies:
????????????Readers:
????????????????Type:?Signature
????????????????Rule:?"OR('OrdererMSP.member')"
????????????Writers:
????????????????Type:?Signature
????????????????Rule:?"OR('OrdererMSP.member')"
????????????Admins:
????????????????Type:?Signature
????????????????Rule:?"OR('OrdererMSP.admin')"
????-?&Org1
????????#?DefaultOrg?defines?the?organization?which?is?used?in?the?sampleconfig
????????#?of?the?fabric.git?development?environment
????????Name:?Org1MSP
????????#?ID?to?load?the?MSP?definition?as
????????ID:?Org1MSP
????????MSPDir:?crypto-config/peerOrganizations/org1.example.com/msp
????????#?Policies?defines?the?set?of?policies?at?this?level?of?the?config?tree
????????#?For?organization?policies,?their?canonical?path?is?usually
????????#???/Channel/<Application|Orderer>/<OrgName>/<PolicyName>
????????Policies:
????????????Readers:
????????????????Type:?Signature
????????????????Rule:?"OR('Org1MSP.admin',?'Org1MSP.peer',?'Org1MSP.client')"
????????????Writers:
????????????????Type:?Signature
????????????????Rule:?"OR('Org1MSP.admin',?'Org1MSP.client')"
????????????Admins:
????????????????Type:?Signature
????????????????Rule:?"OR('Org1MSP.admin')"
????????AnchorPeers:
????????????#?AnchorPeers?defines?the?location?of?peers?which?can?be?used
????????????#?for?cross?org?gossip?communication.??Note,?this?value?is?only
????????????#?encoded?in?the?genesis?block?in?the?Application?section?context
????????????-?Host:?peer0.org1.example.com
??????????????Port:?7051
????-?&Org2
????????#?DefaultOrg?defines?the?organization?which?is?used?in?the?sampleconfig
????????#?of?the?fabric.git?development?environment
????????Name:?Org2MSP
????????#?ID?to?load?the?MSP?definition?as
????????ID:?Org2MSP
????????MSPDir:?crypto-config/peerOrganizations/org2.example.com/msp
????????#?Policies?defines?the?set?of?policies?at?this?level?of?the?config?tree
????????#?For?organization?policies,?their?canonical?path?is?usually
????????#???/Channel/<Application|Orderer>/<OrgName>/<PolicyName>
????????Policies:
????????????Readers:
????????????????Type:?Signature
????????????????Rule:?"OR('Org2MSP.admin',?'Org2MSP.peer',?'Org2MSP.client')"
????????????Writers:
????????????????Type:?Signature
????????????????Rule:?"OR('Org2MSP.admin',?'Org2MSP.client')"
????????????Admins:
????????????????Type:?Signature
????????????????Rule:?"OR('Org2MSP.admin')"
????????AnchorPeers:
????????????#?AnchorPeers?defines?the?location?of?peers?which?can?be?used
????????????#?for?cross?org?gossip?communication.??Note,?this?value?is?only
????????????#?encoded?in?the?genesis?block?in?the?Application?section?context
????????????-?Host:?peer0.org2.example.com
??????????????Port:?7051
????
################################################################################
#
#???SECTION:?Capabilities
#
#???-?This?section?defines?the?capabilities?of?fabric?network.?This?is?a?new
#???concept?as?of?v1.1.0?and?should?not?be?utilized?in?mixed?networks?with
#???v1.0.x?peers?and?orderers.??Capabilities?define?features?which?must?be
#???present?in?a?fabric?binary?for?that?binary?to?safely?participate?in?the
#???fabric?network.??For?instance,?if?a?new?MSP?type?is?added,?newer?binaries
#???might?recognize?and?validate?the?signatures?from?this?type,?while?older
#???binaries?without?this?support?would?be?unable?to?validate?those
#???transactions.??This?could?lead?to?different?versions?of?the?fabric?binaries
#???having?different?world?states.??Instead,?defining?a?capability?for?a?channel
#???informs?those?binaries?without?this?capability?that?they?must?cease
#???processing?transactions?until?they?have?been?upgraded.??For?v1.0.x?if?any
#???capabilities?are?defined?(including?a?map?with?all?capabilities?turned?off)
#???then?the?v1.0.x?peer?will?deliberately?crash.
#
################################################################################
Capabilities:
????#?Channel?capabilities?apply?to?both?the?orderers?and?the?peers?and?must?be
????#?supported?by?both.
????#?Set?the?value?of?the?capability?to?true?to?require?it.
????Channel:?&ChannelCapabilities
????????#?V1.3?for?Channel?is?a?catchall?flag?for?behavior?which?has?been
????????#?determined?to?be?desired?for?all?orderers?and?peers?running?at?the?v1.3.x
????????#?level,?but?which?would?be?incompatible?with?orderers?and?peers?from
????????#?prior?releases.
????????#?Prior?to?enabling?V1.3?channel?capabilities,?ensure?that?all
????????#?orderers?and?peers?on?a?channel?are?at?v1.3.0?or?later.
????????V1_3:?true
????#?Orderer?capabilities?apply?only?to?the?orderers,?and?may?be?safely
????#?used?with?prior?release?peers.
????#?Set?the?value?of?the?capability?to?true?to?require?it.
????Orderer:?&OrdererCapabilities
????????#?V1.1?for?Orderer?is?a?catchall?flag?for?behavior?which?has?been
????????#?determined?to?be?desired?for?all?orderers?running?at?the?v1.1.x
????????#?level,?but?which?would?be?incompatible?with?orderers?from?prior?releases.
????????#?Prior?to?enabling?V1.1?orderer?capabilities,?ensure?that?all
????????#?orderers?on?a?channel?are?at?v1.1.0?or?later.
????????V1_1:?true
????#?Application?capabilities?apply?only?to?the?peer?network,?and?may?be?safely
????#?used?with?prior?release?orderers.
????#?Set?the?value?of?the?capability?to?true?to?require?it.
????Application:?&ApplicationCapabilities
????????#?V1.3?for?Application?enables?the?new?non-backwards?compatible
????????#?features?and?fixes?of?fabric?v1.3.
????????V1_3:?true
????????#?V1.2?for?Application?enables?the?new?non-backwards?compatible
????????#?features?and?fixes?of?fabric?v1.2?(note,?this?need?not?be?set?if
????????#?later?version?capabilities?are?set)
????????V1_2:?false
????????#?V1.1?for?Application?enables?the?new?non-backwards?compatible
????????#?features?and?fixes?of?fabric?v1.1?(note,?this?need?not?be?set?if
????????#?later?version?capabilities?are?set).
????????V1_1:?false
################################################################################
#
#???SECTION:?Application
#
#???-?This?section?defines?the?values?to?encode?into?a?config?transaction?or
#???genesis?block?for?application?related?parameters
#
################################################################################
Application:?&ApplicationDefaults
????#?Organizations?is?the?list?of?orgs?which?are?defined?as?participants?on
????#?the?application?side?of?the?network
????Organizations:
????#?Policies?defines?the?set?of?policies?at?this?level?of?the?config?tree
????#?For?Application?policies,?their?canonical?path?is
????#???/Channel/Application/<PolicyName>
????Policies:
????????Readers:
????????????Type:?ImplicitMeta
????????????Rule:?"ANY?Readers"
????????Writers:
????????????Type:?ImplicitMeta
????????????Rule:?"ANY?Writers"
????????Admins:
????????????Type:?ImplicitMeta
????????????Rule:?"MAJORITY?Admins"
????#?Capabilities?describes?the?application?level?capabilities,?see?the
????#?dedicated?Capabilities?section?elsewhere?in?this?file?for?a?full
????#?description
????Capabilities:
????????<<:?*ApplicationCapabilities
################################################################################
#
#???SECTION:?Orderer
#
#???-?This?section?defines?the?values?to?encode?into?a?config?transaction?or
#???genesis?block?for?orderer?related?parameters
#
################################################################################
Orderer:?&OrdererDefaults
????#?Orderer?Type:?The?orderer?implementation?to?start
????#?Available?types?are?"solo"?and?"kafka"
????OrdererType:?kafka
????Addresses:
????????-?orderer0.example.com:7050
????????-?orderer1.example.com:7050
????????-?orderer2.example.com:7050
????#?Batch?Timeout:?The?amount?of?time?to?wait?before?creating?a?batch
????BatchTimeout:?2s
????#?Batch?Size:?Controls?the?number?of?messages?batched?into?a?block
????BatchSize:
????????#?Max?Message?Count:?The?maximum?number?of?messages?to?permit?in?a?batch
????????MaxMessageCount:?10
????????#?Absolute?Max?Bytes:?The?absolute?maximum?number?of?bytes?allowed?for
????????#?the?serialized?messages?in?a?batch.
????????AbsoluteMaxBytes:?98?MB
????????#?Preferred?Max?Bytes:?The?preferred?maximum?number?of?bytes?allowed?for
????????#?the?serialized?messages?in?a?batch.?A?message?larger?than?the?preferred
????????#?max?bytes?will?result?in?a?batch?larger?than?preferred?max?bytes.
????????PreferredMaxBytes:?512?KB
????Kafka:
????????#?Brokers:?A?list?of?Kafka?brokers?to?which?the?orderer?connects.?Edit
????????#?this?list?to?identify?the?brokers?of?the?ordering?service.
????????#?NOTE:?Use?IP:port?notation.
????????Brokers:
????????????-?kafka0:9092
????????????-?kafka1:9092
????????????-?kafka2:9092
????????????-?kafka3:9092
????#?Organizations?is?the?list?of?orgs?which?are?defined?as?participants?on
????#?the?orderer?side?of?the?network
????Organizations:
????#?Policies?defines?the?set?of?policies?at?this?level?of?the?config?tree
????#?For?Orderer?policies,?their?canonical?path?is
????#???/Channel/Orderer/<PolicyName>
????Policies:
????????Readers:
????????????Type:?ImplicitMeta
????????????Rule:?"ANY?Readers"
????????Writers:
????????????Type:?ImplicitMeta
????????????Rule:?"ANY?Writers"
????????Admins:
????????????Type:?ImplicitMeta
????????????Rule:?"MAJORITY?Admins"
????????#?BlockValidation?specifies?what?signatures?must?be?included?in?the?block
????????#?from?the?orderer?for?the?peer?to?validate?it.
????????BlockValidation:
????????????Type:?ImplicitMeta
????????????Rule:?"ANY?Writers"
????#?Capabilities?describes?the?orderer?level?capabilities,?see?the
????#?dedicated?Capabilities?section?elsewhere?in?this?file?for?a?full
????#?description
????Capabilities:
????????<<:?*OrdererCapabilities
################################################################################
#
#???CHANNEL
#
#???This?section?defines?the?values?to?encode?into?a?config?transaction?or
#???genesis?block?for?channel?related?parameters.
#
################################################################################
Channel:?&ChannelDefaults
????#?Policies?defines?the?set?of?policies?at?this?level?of?the?config?tree
????#?For?Channel?policies,?their?canonical?path?is
????#???/Channel/<PolicyName>
????Policies:
????????#?Who?may?invoke?the?'Deliver'?API
????????Readers:
????????????Type:?ImplicitMeta
????????????Rule:?"ANY?Readers"
????????#?Who?may?invoke?the?'Broadcast'?API
????????Writers:
????????????Type:?ImplicitMeta
????????????Rule:?"ANY?Writers"
????????#?By?default,?who?may?modify?elements?at?this?config?level
????????Admins:
????????????Type:?ImplicitMeta
????????????Rule:?"MAJORITY?Admins"
????#?Capabilities?describes?the?channel?level?capabilities,?see?the
????#?dedicated?Capabilities?section?elsewhere?in?this?file?for?a?full
????#?description
????Capabilities:
????????<<:?*ChannelCapabilities
################################################################################
#
#???Profile
#
#???-?Different?configuration?profiles?may?be?encoded?here?to?be?specified
#???as?parameters?to?the?configtxgen?tool
#
################################################################################
Profiles:
????TwoOrgsOrdererGenesis:
????????<<:?*ChannelDefaults
????????Orderer:
????????????<<:?*OrdererDefaults
????????????Organizations:
????????????????-?*OrdererOrg
????????Consortiums:
????????????SampleConsortium:
????????????????Organizations:
????????????????????-?*Org1
????????????????????-?*Org2
????TwoOrgsChannel:
????????Consortium:?SampleConsortium
????????Application:
????????????<<:?*ApplicationDefaults
????????????Organizations:
????????????????-?*Org1
????????????????-?*Org2

? #使用configtxgen工具，創建創世區塊? TwoOrgsOrdererGenesis 名稱為 configtx.yaml 中 Profiles 字段下定義的

??#[root@xxxx?soft]#configtxgen?-profile?TwoOrgsOrdererGenesis?-outputBlock?./channel-artifacts/genesis.block
2019-08-25?02:25:31.256?CST?[common.tools.configtxgen]?main?->?WARN?001?Omitting?the?channel?ID?for?configtxgen?for?output?operations?is?deprecated.??Explicitly?passing?the?channel?ID?will?be?required?in?the?future,?defaulting?to?'testchainid'.
2019-08-25?02:25:31.256?CST?[common.tools.configtxgen]?main?->?INFO?002?Loading?configuration
2019-08-25?02:25:31.268?CST?[common.tools.configtxgen.localconfig]?completeInitialization?->?INFO?003?orderer?type:?kafka
2019-08-25?02:25:31.268?CST?[common.tools.configtxgen.localconfig]?Load?->?INFO?004?Loaded?configuration:?/opt/soft/configtx.yaml
2019-08-25?02:25:31.279?CST?[common.tools.configtxgen.localconfig]?completeInitialization?->?INFO?005?orderer?type:?kafka
2019-08-25?02:25:31.279?CST?[common.tools.configtxgen.localconfig]?LoadTopLevel?->?INFO?006?Loaded?configuration:?/opt/soft/configtx.yaml
2019-08-25?02:25:31.280?CST?[common.tools.configtxgen]?doOutputBlock?->?INFO?007?Generating?genesis?block
2019-08-25?02:25:31.281?CST?[common.tools.configtxgen]?doOutputBlock?->?INFO?008?Writing?genesis?block

# 下面來生成一個 peer 服務中使用的 tx 文件 TwoOrgsChannel 名稱為 configtx.yaml 中 Profiles 字段下定義的，這里必須指定上面的 channelID

#?[root@xxxx?soft]#?configtxgen?-profile?TwoOrgsChannel?-outputCreateChannelTx?./channel-artifacts/channel.tx?-channelID?mychannel
2019-08-25?02:26:53.395?CST?[common.tools.configtxgen]?main?->?INFO?001?Loading?configuration
2019-08-25?02:26:53.406?CST?[common.tools.configtxgen.localconfig]?Load?->?INFO?002?Loaded?configuration:?/opt/soft/configtx.yaml
2019-08-25?02:26:53.417?CST?[common.tools.configtxgen.localconfig]?completeInitialization?->?INFO?003?orderer?type:?kafka
2019-08-25?02:26:53.417?CST?[common.tools.configtxgen.localconfig]?LoadTopLevel?->?INFO?004?Loaded?configuration:?/opt/soft/configtx.yaml
2019-08-25?02:26:53.417?CST?[common.tools.configtxgen]?doOutputChannelCreateTx?->?INFO?005?Generating?new?channel?configtx
2019-08-25?02:26:53.418?CST?[common.tools.configtxgen]?doOutputChannelCreateTx?->?INFO?006?Writing?new?channel?tx

? #查看生成文件，是否正確

??[root@xxx?soft]#?ls?-lt?channel-artifacts/
??-rw-r--r--?1?root?root???346?8月??25?03:18?channel.tx
??-rw-r--r--?1?root?root?12484?8月??25?03:17?genesis.block

? # 定義組織，生成錨節點更新文件

? # Org1MSP

??[root@xxxx?soft]#?configtxgen?-profile?TwoOrgsChannel?-outputAnchorPeersUpdate?./channel-artifacts/Org1MSPanchors.tx?-channelID?mychannel?-asOrg?Org1MSP
2019-08-25?02:28:04.205?CST?[common.tools.configtxgen]?main?->?INFO?001?Loading?configuration
2019-08-25?02:28:04.216?CST?[common.tools.configtxgen.localconfig]?Load?->?INFO?002?Loaded?configuration:?/opt/soft/configtx.yaml
2019-08-25?02:28:04.227?CST?[common.tools.configtxgen.localconfig]?completeInitialization?->?INFO?003?orderer?type:?kafka
2019-08-25?02:28:04.227?CST?[common.tools.configtxgen.localconfig]?LoadTopLevel?->?INFO?004?Loaded?configuration:?/opt/soft/configtx.yaml
2019-08-25?02:28:04.227?CST?[common.tools.configtxgen]?doOutputAnchorPeersUpdate?->?INFO?005?Generating?anchor?peer?update
2019-08-25?02:28:04.227?CST?[common.tools.configtxgen]?doOutputAnchorPeersUpdate?->?INFO?006?Writing?anchor?peer?update

? # Org2MSP

??[root@xxxx?soft]#?configtxgen?-profile?TwoOrgsChannel?-outputAnchorPeersUpdate?./channel-artifacts/Org2MSPanchors.tx?-channelID?mychannel?-asOrg?Org2MSP
2019-08-25?02:28:37.381?CST?[common.tools.configtxgen]?main?->?INFO?001?Loading?configuration
2019-08-25?02:28:37.392?CST?[common.tools.configtxgen.localconfig]?Load?->?INFO?002?Loaded?configuration:?/opt/soft/configtx.yaml
2019-08-25?02:28:37.403?CST?[common.tools.configtxgen.localconfig]?completeInitialization?->?INFO?003?orderer?type:?kafka
2019-08-25?02:28:37.403?CST?[common.tools.configtxgen.localconfig]?LoadTopLevel?->?INFO?004?Loaded?configuration:?/opt/soft/configtx.yaml
2019-08-25?02:28:37.403?CST?[common.tools.configtxgen]?doOutputAnchorPeersUpdate?->?INFO?005?Generating?anchor?peer?update
2019-08-25?02:28:37.403?CST?[common.tools.configtxgen]?doOutputAnchorPeersUpdate?->?INFO?006?Writing?anchor?peer?update

#拷貝 crypto-config? 、channel-artifacts 目錄到其他節點服務器

??#scp?-r?crypto-config?channel-artifacts?root@172.31.1.90:/opt/soft
??#scp?-r?crypto-config?channel-artifacts?root@172.31.1.91:/opt/soft
??#scp?-r?crypto-config?channel-artifacts?root@172.31.1.92:/opt/soft

三、部署Zookeeper(3個節點) Kafka(4個節點) 集群

? ?注：zk 集群，容器中需要相互指定extra_hosts，并且注意zookeeper定義的ID不要重復，不然無法啟動！！！！

? 1.第一節點 (172.31.1.89)，在/opt/soft目錄下，編寫docker-compose-zookeeper.yaml，如下：

version:?'2'
?
services:
??zookeeper0:
????container_name:?zookeeper0
????hostname:?zookeeper0
????image:?hyperledger/fabric-zookeeper
????restart:?always
????environment:
??????-?ZOO_MY_ID=1
??????-?ZOO_SERVERS=server.1=zookeeper0:2888:3888?server.2=zookeeper1:2888:3888?server.3=zookeeper2:2888:3888
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro
????ports:
??????-?2181:2181
??????-?2888:2888
??????-?3888:3888
????extra_hosts:
??????-?"zookeeper0:172.31.1.89"
??????-?"zookeeper1:172.31.1.90"
??????-?"zookeeper2:172.31.1.91"
??????-?"kafka0:172.31.1.89"
??????-?"kafka1:172.31.1.90"
??????-?"kafka2:172.31.1.91"
??????-?"kafka3:172.31.1.92"

? 2.第一節點 (172.31.1.89)，在/opt/soft目錄下，編寫docker-compose-kafka.yaml，如下

version:?'2'
?
services:
??kafka0:
????container_name:?kafka0
????hostname:?kafka0
????image:?hyperledger/fabric-kafka
????restart:?always
????environment:
??????-?KAFKA_MESSAGE_MAX_BYTES=103809024?
??????-?KAFKA_REPLICA_FETCH_MAX_BYTES=103809024
??????-?KAFKA_UNCLEAN_LEADER_ELECTION_ENABLE=false
????environment:
??????-?KAFKA_BROKER_ID=1
??????-?KAFKA_MIN_INSYNC_REPLICAS=2
??????-?KAFKA_DEFAULT_REPLICATION_FACTOR=3
??????-?KAFKA_ZOOKEEPER_CONNECT=zookeeper0:2181,zookeeper1:2181,zookeeper2:2181
??????-?KAFKA_LOG_RETENTION_MS=-1
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro
??????-?/var/hyperledger/kafka/kafka-logs:/tmp/kafka-logs
????ports:
??????-?9092:9092
????extra_hosts:
??????-?"zookeeper0:172.31.1.89"
??????-?"zookeeper1:172.31.1.90"
??????-?"zookeeper2:172.31.1.91"
??????-?"kafka0:172.31.1.89"
??????-?"kafka1:172.31.1.90"
??????-?"kafka2:172.31.1.91"
??????-?"kafka3:172.31.1.92"

? 3.第二節點 (172.31.1.90)，在/opt/soft目錄下，編寫docker-compose-zookeeper.yaml，如下

version:?'2'
?
services:
??zookeeper1:
????container_name:?zookeeper1
????hostname:?zookeeper1
????image:?hyperledger/fabric-zookeeper
????restart:?always
????environment:
??????-?ZOO_MY_ID=2
??????-?ZOO_SERVERS=server.1=zookeeper0:2888:3888?server.2=zookeeper1:2888:3888?server.3=zookeeper2:2888:3888
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro
????ports:
??????-?2181:2181
??????-?2888:2888
??????-?3888:3888
????extra_hosts:
??????-?"zookeeper0:172.31.1.89"
??????-?"zookeeper1:172.31.1.90"
??????-?"zookeeper2:172.31.1.91"
??????-?"kafka0:172.31.1.89"
??????-?"kafka1:172.31.1.90"
??????-?"kafka2:172.31.1.91"
??????-?"kafka3:172.31.1.92"

? 4.第二節點 (172.31.1.90)，在/opt/soft目錄下，編寫docker-compose-kafka.yaml，如下

version:?'2'
?
services:
??kafka1:
????container_name:?kafka1
????hostname:?kafka1
????image:?hyperledger/fabric-kafka
????restart:?always
????environment:
??????-?KAFKA_MESSAGE_MAX_BYTES=103809024?
??????-?KAFKA_REPLICA_FETCH_MAX_BYTES=103809024?
??????-?KAFKA_UNCLEAN_LEADER_ELECTION_ENABLE=false
????environment:
??????-?KAFKA_BROKER_ID=2
??????-?KAFKA_MIN_INSYNC_REPLICAS=2
??????-?KAFKA_DEFAULT_REPLICATION_FACTOR=3
??????-?KAFKA_ZOOKEEPER_CONNECT=zookeeper0:2181,zookeeper1:2181,zookeeper2:2181
??????-?KAFKA_LOG_RETENTION_MS=-1
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro
??????-?/var/hyperledger/kafka/kafka-logs:/tmp/kafka-logs
????ports:
??????-?9092:9092
????extra_hosts:
??????-?"zookeeper0:172.31.1.89"
??????-?"zookeeper1:172.31.1.90"
??????-?"zookeeper2:172.31.1.91"
??????-?"kafka0:172.31.1.89"
??????-?"kafka1:172.31.1.90"
??????-?"kafka2:172.31.1.91"
??????-?"kafka3:172.31.1.92"

? 5.第三節點 (172.31.1.91)，在/opt/soft目錄下，編寫docker-compose-zookeeper.yaml，如下

version:?'2'
?
services:
??zookeeper2:
????container_name:?zookeeper2
????hostname:?zookeeper2
????image:?hyperledger/fabric-zookeeper
????restart:?always
????environment:
??????-?ZOO_MY_ID=3
??????-?ZOO_SERVERS=server.1=zookeeper0:2888:3888?server.2=zookeeper1:2888:3888?server.3=zookeeper2:2888:3888
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro
????ports:
??????-?2181:2181
??????-?2888:2888
??????-?3888:3888
????extra_hosts:
??????-?"zookeeper0:172.31.1.89"
??????-?"zookeeper1:172.31.1.90"
??????-?"zookeeper2:172.31.1.91"
??????-?"kafka0:172.31.1.89"
??????-?"kafka1:172.31.1.90"
??????-?"kafka2:172.31.1.91"
??????-?"kafka3:172.31.1.92"

? 6.第三節點 (172.31.1.91)，在/opt/soft目錄下，編寫docker-compose-kafka.yaml，如下

version:?'2'
?
services:
??kafka2:
????container_name:?kafka2
????hostname:?kafka2
????image:?hyperledger/fabric-kafka
????restart:?always
????environment:
??????-?KAFKA_MESSAGE_MAX_BYTES=103809024?
??????-?KAFKA_REPLICA_FETCH_MAX_BYTES=103809024?
??????-?KAFKA_UNCLEAN_LEADER_ELECTION_ENABLE=false
????environment:
??????-?KAFKA_BROKER_ID=3
??????-?KAFKA_MIN_INSYNC_REPLICAS=2
??????-?KAFKA_DEFAULT_REPLICATION_FACTOR=3
??????-?KAFKA_ZOOKEEPER_CONNECT=zookeeper0:2181,zookeeper1:2181,zookeeper2:2181
??????-?KAFKA_LOG_RETENTION_MS=-1
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro
??????-?/var/hyperledger/kafka/kafka-logs:/tmp/kafka-logs
????ports:
??????-?9092:9092
????extra_hosts:
??????-?"zookeeper0:172.31.1.89"
??????-?"zookeeper1:172.31.1.90"
??????-?"zookeeper2:172.31.1.91"
??????-?"kafka0:172.31.1.89"
??????-?"kafka1:172.31.1.90"
??????-?"kafka2:172.31.1.91"
??????-?"kafka3:172.31.1.92"

? 7.第四節點 (172.31.1.92)，在/opt/soft目錄下，編寫docker-compose-kafka.yaml，如下

version:?'2'
?
services:
??kafka3:
????container_name:?kafka3
????hostname:?kafka3
????image:?hyperledger/fabric-kafka
????restart:?always
????environment:
??????-?KAFKA_MESSAGE_MAX_BYTES=103809024?
??????-?KAFKA_REPLICA_FETCH_MAX_BYTES=103809024?
??????-?KAFKA_UNCLEAN_LEADER_ELECTION_ENABLE=false
????environment:
??????-?KAFKA_BROKER_ID=4
??????-?KAFKA_MIN_INSYNC_REPLICAS=2
??????-?KAFKA_DEFAULT_REPLICATION_FACTOR=3
??????-?KAFKA_ZOOKEEPER_CONNECT=zookeeper0:2181,zookeeper1:2181,zookeeper2:2181
??????-?KAFKA_LOG_RETENTION_MS=-1
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro
??????-?/var/hyperledger/kafka/kafka-logs:/tmp/kafka-logs
????ports:
??????-?9092:9092
????extra_hosts:
??????-?"zookeeper0:172.31.1.89"
??????-?"zookeeper1:172.31.1.90"
??????-?"zookeeper2:172.31.1.91"
??????-?"kafka0:172.31.1.89"
??????-?"kafka1:172.31.1.90"
??????-?"kafka2:172.31.1.91"
??????-?"kafka3:172.31.1.92"

#啟動服務
?啟動服務順序先啟動zookeeper集群,再啟動kafka集群
?docker-compose?-f?docker-compose-zookeeper.yaml?up?-d
?docker-compose?-f?docker-compose-kafka.yaml?up?-d

四、部署Hyperledger Fabric Orderer排序服務集群，3個節點

? 1.第一個節點 (172.31.1.89)，在/opt/soft目錄下，編寫docker-compose-orderer.yaml，如下：

version:?'2'
services:
??orderer0.example.com:
????container_name:?orderer0.example.com
????image:?hyperledger/fabric-orderer
????environment:
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft_default
??????-?ORDERER_GENERAL_LOGLEVEL=debug
??????-?ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
??????-?ORDERER_GENERAL_GENESISMETHOD=file
??????-?ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
??????-?ORDERER_GENERAL_LOCALMSPID=OrdererMSP
??????-?ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
??????-?ORDERER_GENERAL_TLS_ENABLED=false
??????-?ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
??????-?ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
??????-?ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
??????-?ORDERER_KAFKA_RETRY_LONGINTERVAL=10s
??????-?ORDERER_KAFKA_RETRY_LONGTOTAL=100s
??????-?ORDERER_KAFKA_RETRY_SHORTINTERVAL=1s
??????-?ORDERER_KAFKA_RETRY_SHORTTOTAL=30s
??????-?ORDERER_KAFKA_VERBOSE=true
??????-?ORDERER_KAFKA_BROKERS=[kafka0:9092,kafka1:9092,kafka2:9092,kafka3:9092]
????working_dir:?/opt/gopath/src/github.com/hyperledger/fabric
????command:?orderer
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro
??????-?/var/hyperledger/order_data/:/var/hyperledger/production/
??????-?./channel-artifacts/genesis.block:/var/hyperledger/orderer/orderer.genesis.block
??????-?./crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/msp:/var/hyperledger/orderer/msp
??????-?./crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/tls/:/var/hyperledger/orderer/tls
????ports:
??????-?7050:7050
????extra_hosts:
??????-?"zookeeper0:172.31.1.89"
??????-?"zookeeper1:172.31.1.90"
??????-?"zookeeper2:172.31.1.91"
??????-?"kafka0:172.31.1.89"
??????-?"kafka1:172.31.1.90"
??????-?"kafka2:172.31.1.91"
??????-?"kafka3:172.31.1.92"

? 2.第二個節點 (172.31.1.90)，在/opt/soft目錄下，編寫docker-compose-orderer.yaml，如下：

version:?'2'
services:
??orderer1.example.com:
????container_name:?orderer1.example.com
????image:?hyperledger/fabric-orderer
????environment:
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft_default
??????-?ORDERER_GENERAL_LOGLEVEL=debug
??????-?ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
??????-?ORDERER_GENERAL_GENESISMETHOD=file
??????-?ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
??????-?ORDERER_GENERAL_LOCALMSPID=OrdererMSP
??????-?ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
??????-?ORDERER_GENERAL_TLS_ENABLED=false
??????-?ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
??????-?ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
??????-?ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
??????-?ORDERER_KAFKA_RETRY_LONGINTERVAL=10s
??????-?ORDERER_KAFKA_RETRY_LONGTOTAL=100s
??????-?ORDERER_KAFKA_RETRY_SHORTINTERVAL=1s
??????-?ORDERER_KAFKA_RETRY_SHORTTOTAL=30s
??????-?ORDERER_KAFKA_VERBOSE=true
??????-?ORDERER_KAFKA_BROKERS=[kafka0:9092,kafka1:9092,kafka2:9092,kafka3:9092]
????working_dir:?/opt/gopath/src/github.com/hyperledger/fabric
????command:?orderer
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro
??????-?/var/hyperledger/order_data/:/var/hyperledger/production/
??????-?./channel-artifacts/genesis.block:/var/hyperledger/orderer/orderer.genesis.block
??????-?./crypto-config/ordererOrganizations/example.com/orderers/orderer1.example.com/msp:/var/hyperledger/orderer/msp
??????-?./crypto-config/ordererOrganizations/example.com/orderers/orderer1.example.com/tls/:/var/hyperledger/orderer/tls
????ports:
??????-?7050:7050
????extra_hosts:
??????-?"zookeeper0:172.31.1.89"
??????-?"zookeeper1:172.31.1.90"
??????-?"zookeeper2:172.31.1.91"????
??????-?"kafka0:172.31.1.89"
??????-?"kafka1:172.31.1.90"
??????-?"kafka2:172.31.1.91"
??????-?"kafka3:172.31.1.92"

? 3.第三個節點 (172.31.1.91)，在/opt/soft目錄下，編寫docker-compose-orderer.yaml，如下：

version:?'2'
services:
??orderer2.example.com:
????container_name:?orderer2.example.com
????image:?hyperledger/fabric-orderer
????environment:
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft_default
??????-?ORDERER_GENERAL_LOGLEVEL=debug
??????-?ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
??????-?ORDERER_GENERAL_GENESISMETHOD=file
??????-?ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
??????-?ORDERER_GENERAL_LOCALMSPID=OrdererMSP
??????-?ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
??????-?ORDERER_GENERAL_TLS_ENABLED=false
??????-?ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
??????-?ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
??????-?ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
??????-?ORDERER_KAFKA_RETRY_LONGINTERVAL=10s
??????-?ORDERER_KAFKA_RETRY_LONGTOTAL=100s
??????-?ORDERER_KAFKA_RETRY_SHORTINTERVAL=1s
??????-?ORDERER_KAFKA_RETRY_SHORTTOTAL=30s
??????-?ORDERER_KAFKA_VERBOSE=true
??????-?ORDERER_KAFKA_BROKERS=[kafka0:9092,kafka1:9092,kafka2:9092,kafka3:9092]
????working_dir:?/opt/gopath/src/github.com/hyperledger/fabric
????command:?orderer
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro
??????-?/var/hyperledger/order_data/:/var/hyperledger/production/
??????-?./channel-artifacts/genesis.block:/var/hyperledger/orderer/orderer.genesis.block
??????-?./crypto-config/ordererOrganizations/example.com/orderers/orderer2.example.com/msp:/var/hyperledger/orderer/msp
??????-?./crypto-config/ordererOrganizations/example.com/orderers/orderer2.example.com/tls/:/var/hyperledger/orderer/tls
????ports:
??????-?7050:7050
????extra_hosts:
??????-?"zookeeper0:172.31.1.89"
??????-?"zookeeper1:172.31.1.90"
??????-?"zookeeper2:172.31.1.91"????
??????-?"kafka0:172.31.1.89"
??????-?"kafka1:172.31.1.90"
??????-?"kafka2:172.31.1.91"
??????-?"kafka3:172.31.1.92"

#啟動服務，按照節點順序啟動
??docker-compose?-f?docker-compose-orderer.yaml?up?-d
??#?docker?logs?xxx?
????????2019-08-25?15:35:35.436?CST?[orderer.common.server]?Start?->?INFO?008?Beginning?to?serve?requests
????????2019-08-25?15:35:35.436?CST?[orderer.consensus.kafka]?setupTopicForChannel?->?INFO?009?[channel:?testchainid]?Setting?up?the?topic?for?this?channel...
????????2019-08-25?15:35:35.475?CST?[orderer.consensus.kafka]?setupProducerForChannel?->?INFO?00a?[channel:?testchainid]?Setting?up?the?producer?for?this?channel...
????????2019-08-25?15:35:35.487?CST?[orderer.consensus.kafka]?startThread?->?INFO?00b?[channel:?testchainid]?Producer?set?up?successfully
????????2019-08-25?15:35:35.487?CST?[orderer.consensus.kafka]?sendConnectMessage?->?INFO?00c?[channel:?testchainid]?About?to?post?the?CONNECT?message...
????????2019-08-25?15:35:35.842?CST?[orderer.consensus.kafka]?startThread?->?INFO?00d?[channel:?testchainid]?CONNECT?message?posted?successfully
????????2019-08-25?15:35:35.842?CST?[orderer.consensus.kafka]?setupParentConsumerForChannel?->?INFO?00e?[channel:?testchainid]?Setting?up?the?parent?consumer?for?this?channel...
????????2019-08-25?15:35:35.849?CST?[orderer.consensus.kafka]?startThread?->?INFO?00f?[channel:?testchainid]?Parent?consumer?set?up?successfully
????????2019-08-25?15:35:35.849?CST?[orderer.consensus.kafka]?setupChannelConsumerForChannel?->?INFO?010?[channel:?testchainid]?Setting?up?the?channel?consumer?for?this?channel?(start?offset:?-2)...

五、部署Hyperledger Fabric Peer排序服務集群，4個節點

? ? 注意：Peer節點下都必須啟動一個數據存儲，如 file 或者 couchdb 等，示例采用couchdb，并且強烈建議另外掛載可擴容的存儲設備(阿里云云盤，NAS,OSS)！！！

? ? 如示例中，掛載阿里云云盤至節點主機 /mnt/data/couchdb0/data(宿主掛載路徑)

? ? 下列容器couchdb0配置項中，增加如下

? ? ?volumes:

? ? ? # 數據持久化，用于存儲鏈碼值

? ? ? - /mnt/data/couchdb0/data:/opt/couchdb/data

? 1.第一個節點 (172.31.1.89)，在/opt/soft目錄下，編寫docker-compose-peer.yaml，如下：

? ? 注：配置參數CORE_PEER_TLS_ENABLED=false,如果啟用tls認證，必須改為true

version:?'2'
?
services:
??couchdb0:
????container_name:?couchdb0
????image:?hyperledger/fabric-couchdb
????environment:
??????-?COUCHDB_USER=
??????-?COUCHDB_PASSWORD=
????ports:
??????-?"5984:5984"
????volumes:
??????#?數據持久化，用于存儲鏈碼值
??????-?/mnt/data/couchdb0/data:/opt/couchdb/data
??peer0.org1.example.com:
????container_name:?peer0.org1.example.com
????hostname:?peer0.org1.example.com
????image:?hyperledger/fabric-peer
????environment:
??????-?CORE_LEDGER_STATE_STATEDATABASE=CouchDB
??????-?CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb0:5984
??????-?CORE_PEER_ID=peer0.org1.example.com
??????-?CORE_PEER_NETWORKID=soft
??????-?CORE_PEER_ADDRESS=peer0.org1.example.com:7051
??????-?CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:7051
??????-?CORE_PEER_LOCALMSPID=Org1MSP
??????-?CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft
??????-?CORE_LOGGING_LEVEL=DEBUG
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft_default
??????-?CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
??????-?CORE_PEER_GOSSIP_USELEADERELECTION=true
??????-?CORE_PEER_GOSSIP_ORGLEADER=false
??????-?CORE_PEER_PROFILE_ENABLED=false
??????-?CORE_CHAINCODE_EXECUTETIMEOUT=1000s
??????-?CORE_CHAINCODE_DEPLOYTIMEOUT=1000s
??????-?CORE_PEER_TLS_ENABLED=false
??????-?CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
??????-?CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
??????-?CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
????working_dir:?/opt/gopath/src/github.com/hyperledger/fabric/peer
????command:?peer?node?start
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro????
??????-?/var/run/:/host/var/run/
??????-?/var/hyperledger/peer_data/:/var/hyperledger/production/
??????-?./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/fabric/msp
??????-?./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/etc/hyperledger/fabric/tls
????ports:
??????-?7051:7051
??????-?7052:7052
??????-?7053:7053
????depends_on:
??????-?couchdb0??????
????extra_hosts:
??????-?"couchdb0:172.31.1.89"
??????-?"orderer0.example.com:172.31.1.89"
??????-?"orderer1.example.com:172.31.1.90"
??????-?"orderer2.example.com:172.31.1.91"

? 2.第二個節點 (172.31.1.90)，在/opt/soft目錄下，編寫docker-compose-peer.yaml，如下：

? ? 注：配置參數CORE_PEER_TLS_ENABLED=false,如果啟用tls認證，必須改為true

version:?'2'
?
services:
??couchdb1:
????container_name:?couchdb1
????image:?hyperledger/fabric-couchdb
????environment:
??????-?COUCHDB_USER=
??????-?COUCHDB_PASSWORD=
????ports:
??????-?"5984:5984"
????volumes:
??????#?數據持久化，用于存儲鏈碼值
??????-?/mnt/data/couchdb1/data:/opt/couchdb/data
??peer1.org1.example.com:
????container_name:?peer1.org1.example.com
????hostname:?peer1.org1.example.com
????image:?hyperledger/fabric-peer
????environment:
??????-?CORE_LEDGER_STATE_STATEDATABASE=CouchDB
??????-?CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb1:5984
??????-?CORE_PEER_ID=peer1.org1.example.com
??????-?CORE_PEER_NETWORKID=soft
??????-?CORE_PEER_ADDRESS=peer1.org1.example.com:7051
??????-?CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org1.example.com:7051
??????-?CORE_PEER_LOCALMSPID=Org1MSP
??????-?CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft
??????-?CORE_LOGGING_LEVEL=DEBUG
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft_default
??????-?CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
??????-?CORE_PEER_GOSSIP_USELEADERELECTION=true
??????-?CORE_PEER_GOSSIP_ORGLEADER=false
??????-?CORE_PEER_PROFILE_ENABLED=false
??????-?CORE_CHAINCODE_EXECUTETIMEOUT=1000s
??????-?CORE_CHAINCODE_DEPLOYTIMEOUT=1000s
??????-?CORE_PEER_TLS_ENABLED=false
??????-?CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
??????-?CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
??????-?CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
????working_dir:?/opt/gopath/src/github.com/hyperledger/fabric/peer
????command:?peer?node?start
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro????????
??????-?/var/run/:/host/var/run/
??????-?/var/hyperledger/peer_data/:/var/hyperledger/production/
??????-?./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/msp:/etc/hyperledger/fabric/msp
??????-?./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls:/etc/hyperledger/fabric/tls
????ports:
??????-?7051:7051
??????-?7052:7052
??????-?7053:7053
????depends_on:
??????-?couchdb1??????
????extra_hosts:
??????-?"couchdb1:172.31.1.90"
??????-?"orderer0.example.com:172.31.1.89"
??????-?"orderer1.example.com:172.31.1.90"
??????-?"orderer2.example.com:172.31.1.91"

? 3.第三個節點 (172.31.1.91)，在/opt/soft目錄下，編寫docker-compose-peer.yaml，如下：

version:?'2'
?
services:
??couchdb2:
????container_name:?couchdb2
????image:?hyperledger/fabric-couchdb
????environment:
??????-?COUCHDB_USER=
??????-?COUCHDB_PASSWORD=
????ports:
??????-?"5984:5984"
????volumes:
??????#?數據持久化，用于存儲鏈碼值
??????-?/mnt/data/couchdb2/data:/opt/couchdb/data
??peer0.org2.example.com:
????container_name:?peer0.org2.example.com
????hostname:?peer0.org2.example.com
????image:?hyperledger/fabric-peer
????environment:
??????-?CORE_LEDGER_STATE_STATEDATABASE=CouchDB
??????-?CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb2:5984
??????-?CORE_PEER_ID=peer0.org2.example.com
??????-?CORE_PEER_NETWORKID=soft
??????-?CORE_PEER_ADDRESS=peer0.org2.example.com:7051
??????-?CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org2.example.com:7051
??????-?CORE_PEER_LOCALMSPID=Org2MSP
??????-?CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft
??????-?CORE_LOGGING_LEVEL=DEBUG
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft_default
??????-?CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
??????-?CORE_PEER_GOSSIP_USELEADERELECTION=true
??????-?CORE_PEER_GOSSIP_ORGLEADER=false
??????-?CORE_PEER_PROFILE_ENABLED=false
??????-?CORE_CHAINCODE_EXECUTETIMEOUT=1000s
??????-?CORE_CHAINCODE_DEPLOYTIMEOUT=1000s
??????-?CORE_PEER_TLS_ENABLED=false
??????-?CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
??????-?CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
??????-?CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
????working_dir:?/opt/gopath/src/github.com/hyperledger/fabric/peer
????command:?peer?node?start
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro??????
??????-?/var/run/:/host/var/run/
??????-?/var/hyperledger/peer_data/:/var/hyperledger/production/
??????-?./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/msp:/etc/hyperledger/fabric/msp
??????-?./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls:/etc/hyperledger/fabric/tls
????ports:
??????-?7051:7051
??????-?7052:7052
??????-?7053:7053
????depends_on:
??????-?couchdb2
????extra_hosts:
??????-?"couchdb2:172.31.1.91"
??????-?"orderer0.example.com:172.31.1.89"
??????-?"orderer1.example.com:172.31.1.90"
??????-?"orderer2.example.com:172.31.1.91"

? 4.第四個節點 (172.31.1.92)，在/opt/soft目錄下，編寫docker-compose-peer.yaml，如下：

version:?'2'
?
services:
??couchdb3:
????container_name:?couchdb3
????image:?hyperledger/fabric-couchdb
????environment:
??????-?COUCHDB_USER=
??????-?COUCHDB_PASSWORD=
????ports:
??????-?"5984:5984"
????volumes:
??????#?數據持久化，用于存儲鏈碼值
??????-?/mnt/data/couchdb3/data:/opt/couchdb/data
??peer1.org2.example.com:
????container_name:?peer1.org2.example.com
????hostname:?peer1.org2.example.com
????image:?hyperledger/fabric-peer
????environment:
??????-?CORE_LEDGER_STATE_STATEDATABASE=CouchDB
??????-?CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb3:5984????
??????-?CORE_PEER_ID=peer1.org2.example.com
??????-?CORE_PEER_NETWORKID=soft
??????-?CORE_PEER_ADDRESS=peer1.org2.example.com:7051
??????-?CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org2.example.com:7051
??????-?CORE_PEER_LOCALMSPID=Org2MSP
??????-?CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft
??????-?CORE_LOGGING_LEVEL=DEBUG
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft_default
??????-?CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
??????-?CORE_PEER_GOSSIP_USELEADERELECTION=true
??????-?CORE_PEER_GOSSIP_ORGLEADER=false
??????-?CORE_PEER_PROFILE_ENABLED=false
??????-?CORE_CHAINCODE_EXECUTETIMEOUT=1000s
??????-?CORE_CHAINCODE_DEPLOYTIMEOUT=1000s
??????-?CORE_PEER_TLS_ENABLED=false
??????-?CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
??????-?CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
??????-?CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
????working_dir:?/opt/gopath/src/github.com/hyperledger/fabric/peer
????command:?peer?node?start
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro?????
??????-?/var/run/:/host/var/run/
??????-?/var/hyperledger/peer_data/:/var/hyperledger/production/
??????-?./crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/msp:/etc/hyperledger/fabric/msp
??????-?./crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls:/etc/hyperledger/fabric/tls
????ports:
??????-?7051:7051
??????-?7052:7052
??????-?7053:7053
????depends_on:
??????-?couchdb3
????extra_hosts:
??????-?"couchdb3:172.31.1.92"
??????-?"orderer0.example.com:172.31.1.89"
??????-?"orderer1.example.com:172.31.1.90"
??????-?"orderer2.example.com:172.31.1.91"
?
???#啟動peer節點服務
???#docker-compose?-f?docker-compose-peer.yaml?up?-d
???#docker?logs?xxx
???2019-08-25?02:05:20.638?UTC?[nodeCmd]?serve?->?INFO?124?Starting?peer?with?ID=[name:"peer0.org1.example.com"?],?network?ID=[soft],?address=[peer0.org1.example.com:7051]
???2019-08-25?02:05:20.638?UTC?[nodeCmd]?serve?->?INFO?125?Started?peer?with?ID=[name:"peer0.org1.example.com"?],?network?ID=[soft],?address=[peer0.org1.example.com:7051]

六、部署Hyperledger Fabric cli 客戶端服務

? 1.在第一節點(172.31.1.89)只需要配置一個既可,其他節點可不用部署,用于調用創建 channel 與智能合約?

? ?#在/opt/soft目錄下，編寫docker-compose-peer.yaml，如下：

version:?'2'
?
services:
??
??cli:
????container_name:?cli
????image:?hyperledger/fabric-tools
????tty:?true
????environment:
??????-?GOPATH=/opt/gopath
??????-?CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
??????-?CORE_LOGGING_LEVEL=DEBUG
??????-?CORE_PEER_ID=cli
??????-?CORE_PEER_ADDRESS=peer0.org1.example.com:7051
??????-?CORE_PEER_LOCALMSPID=Org1MSP
??????-?CORE_PEER_TLS_ENABLED=false
??????-?CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt
??????-?CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key
??????-?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
??????-?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
????working_dir:?/opt/gopath/src/github.com/hyperledger/fabric/peer
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro????
??????-?/var/run/:/host/var/run/
??????-?/usr/local/go:/opt/go
??????-?/opt/gopath:/opt/gopath
??????-?./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/examples/chaincode/go
??????-?./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
??????-?./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
????extra_hosts:
??????-?"orderer0.example.com:172.31.1.89"
??????-?"orderer1.example.com:172.31.1.90"
??????-?"orderer2.example.com:172.31.1.91"
??????-?"peer0.org1.example.com:172.31.1.89"
??????-?"peer1.org1.example.com:172.31.1.90"
??????-?"peer0.org2.example.com:172.31.1.91"
??????-?"peer1.org2.example.com:172.31.1.92"
??##啟動服務
??#docker-compose?-f?docker-compose-cli.yaml?up?-d

七、Hyperledger Fabric 創建 Channel

?1.在第一節點(172.31.1.89),進入 cli 容器，我們可以直接進入容器里操作

??[root@xxxxx?soft]#?docker?exec?-it?cli?bash
??root@77962643125a:/opt/gopath/src/github.com/hyperledger/fabric/peer#

??#?執行?創建命令?(未開啟認證)
??#peer?channel?create?-c?mychannel?-f?./channel-artifacts/channel.tx?--orderer?orderer0.example.com:7050

? # 創建以后生成文件 mychannel.block

2.繼續在第一節點(172.31.1.89),cli 容器中，執行把現有所有節點服務peer節點加入到Channel中，示例現有4個peer

? # peer0.org1.example.com 加入此 channel 中，首先需要查看如下環境變量

????echo?$CORE_PEER_LOCALMSPID
????echo?$CORE_PEER_ADDRESS
????echo?$CORE_PEER_TLS_ROOTCERT_FILE
????echo?$CORE_PEER_MSPCONFIGPATH
????#?echo?$CORE_PEER_LOCALMSPID
????Org1MSP
????#?echo?$CORE_PEER_ADDRESS
????peer0.org1.example.com:7051
????#?echo?$CORE_PEER_MSPCONFIGPATH
????/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
????#?echo?$CORE_PEER_TLS_ROOTCERT_FILE
????/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt

#?加入?channel
??#peer?channel?join?-b?mychannel.block
??輸出：
??2019-08-25?16:40:10.255?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?16:40:10.259?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?16:40:10.260?CST?[channelCmd]?InitCmdFactory?->?INFO?003?Endorser?and?orderer?connections?initialized
??2019-08-25?16:40:10.371?CST?[channelCmd]?executeJoin?->?INFO?004?Successfully?submitted?proposal?to?join?channel

? # peer1.org1.example.com 加入此 channel 中，這里配置一下環境變量

????export?CORE_PEER_LOCALMSPID="Org1MSP"
????export?CORE_PEER_ADDRESS=peer1.org1.example.com:7051
????export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt
????export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
??#peer?channel?join?-b?mychannel.block
??輸出：
??2019-08-25?16:43:09.353?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?16:43:09.357?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?16:43:09.358?CST?[channelCmd]?InitCmdFactory?->?INFO?003?Endorser?and?orderer?connections?initialized
??2019-08-25?16:43:09.473?CST?[channelCmd]?executeJoin?->?INFO?004?Successfully?submitted?proposal?to?join?channe

? # peer0.Org2.example.com 加入此 channel 中，這里配置一下環境變量

??export?CORE_PEER_LOCALMSPID="Org2MSP"
??export?CORE_PEER_ADDRESS=peer0.org2.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
??#peer?channel?join?-b?mychannel.block
??輸出：
??2019-08-25?16:45:17.626?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?16:45:17.630?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?16:45:17.632?CST?[channelCmd]?InitCmdFactory?->?INFO?003?Endorser?and?orderer?connections?initialized
??2019-08-25?16:45:17.757?CST?[channelCmd]?executeJoin?->?INFO?004?Successfully?submitted?proposal?to?join?channel

? # peer1.org2.example.com 加入此 channel 中，這里配置一下環境變量

??export?CORE_PEER_LOCALMSPID="Org2MSP"
??export?CORE_PEER_ADDRESS=peer1.org2.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
??#peer?channel?join?-b?mychannel.block
??輸出：
??2019-08-25?16:46:58.401?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?16:46:58.405?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?16:46:58.407?CST?[channelCmd]?InitCmdFactory?->?INFO?003?Endorser?and?orderer?connections?initialized
??2019-08-25?16:46:58.523?CST?[channelCmd]?executeJoin?->?INFO?004?Successfully?submitted?proposal?to?join?channel

八、Hyperledger Fabric 錨節點

? 1.錨節點通過廣播的方式通知有新節點加入

? # 使用Org1的管理員身份更新錨節點配置?

? # 同樣需要先配置變量

??export?CORE_PEER_LOCALMSPID="Org1MSP"
??export?CORE_PEER_ADDRESS=peer0.org1.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp

??#?未開啟認證的方式
??#peer?channel?update?-o?orderer0.example.com:7050?-c?mychannel?-f?./channel-artifacts/Org1MSPanchors.tx
??輸出：
??2019-08-25?16:49:42.877?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?16:49:42.881?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?16:49:42.882?CST?[channelCmd]?InitCmdFactory?->?INFO?003?Endorser?and?orderer?connections?initialized
??2019-08-25?16:49:43.018?CST?[channelCmd]?update?->?INFO?004?Successfully?submitted?channel?update

? # 使用Org2的管理員身份更新錨節點配置?

? # 同樣需要先配置變量

??export?CORE_PEER_LOCALMSPID="Org2MSP"
??export?CORE_PEER_ADDRESS=peer0.org2.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
??#peer?channel?update?-o?orderer0.example.com:7050?-c?mychannel?-f?./channel-artifacts/Org2MSPanchors.tx
??輸出：
??2019-08-25?16:52:44.317?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?16:52:44.321?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?16:52:44.322?CST?[channelCmd]?InitCmdFactory?->?INFO?003?Endorser?and?orderer?connections?initialized
??2019-08-25?16:52:44.362?CST?[channelCmd]?update?->?INFO?004?Successfully?submitted?channel?update

? ##把當前cli環境變量恢復為最初配置

??export?CORE_PEER_LOCALMSPID="Org1MSP"
????export?CORE_PEER_ADDRESS=peer0.org1.example.com:7051
????export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
????export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp

九、Hyperledger Fabric 實例化測試

? 1.安裝智能合約

? ## cli 容器部分預先掛載了目錄：? ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/examples/chaincode/go

? #第一節點(172.31.1.89)拷貝了官方的例子，在 chaincode 下, 下面我們來測試一下

#cd?/opt/soft/
??#[root@xxxx?soft]#?cp?-r?/opt/gopath/src/github.com/hyperledger/fabric/examples/chaincode/go/example0*?./chaincode/go/
??[root@xxxx?soft]#?cd?chaincode/go/
??[root@xxx?go]#?ll
??total?20
??drwxr-xr-x?3?root?root?4096?Aug?25?16:57?example01
??drwxr-xr-x?3?root?root?4096?Aug?25?16:57?example02
??drwxr-xr-x?3?root?root?4096?Aug?25?16:57?example03
??drwxr-xr-x?3?root?root?4096?Aug?25?16:57?example04
??drwxr-xr-x?3?root?root?4096?Aug?25?16:57?example05

? #這里示例測試引用example02，需要對example02進行下面修改

? ? ?# 注: 這里面的 example02 的 package 為 example02 會報錯

? ? ?Error: could not assemble transaction, err Proposal response was not successful, error code 500, msg failed to execute transaction 819b581ce88604e9b6651764324876f2ca7a47d7aeb7ee307f273af867a4a134: error starting container: error starting container: API error (404): oci runtime error: container_linux.go:247: starting container process caused "exec: \"chaincode\": executable file not found in $PATH"

? # 將 chaincode.go? chaincode_test.go 中? package 修改成 main 然后在最下面增加 main()函數

func?main()?{
????????err?:=?shim.Start(new(SimpleChaincode))
????????if?err?!=?nil?{
????????????????fmt.Printf("Error?starting?Simple?chaincode:?%s",?err)
????????}
}

? # 安裝指定合約到所有的 peer 節點中，每個節點都必須安裝一次

? # 同樣需要先配置變量??

? ##peer0.org1.example.com

??export?CORE_PEER_LOCALMSPID="Org1MSP"
??export?CORE_PEER_ADDRESS=peer0.org1.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp

#?安裝?合約
??#peer?chaincode?install?-n?example2?-p?github.com/hyperledger/fabric/examples/chaincode/go/example02?-v?1.0???
??輸出：
??2019-08-25?17:09:28.929?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:09:28.933?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:09:28.936?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?003?Using?default?escc
??2019-08-25?17:09:28.937?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?004?Using?default?vscc
??2019-08-25?17:09:30.612?CST?[chaincodeCmd]?install?->?INFO?005?Installed?remotely?response:<status:200?payload:"OK"?>

? ##peer1.org1.example.com

??export?CORE_PEER_LOCALMSPID="Org1MSP"
??export?CORE_PEER_ADDRESS=peer1.org1.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
??#peer?chaincode?install?-n?example2?-p?github.com/hyperledger/fabric/examples/chaincode/go/example02?-v?1.0?
??輸出：
??2019-08-25?17:13:15.194?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:13:15.197?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:13:15.201?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?003?Using?default?escc
??2019-08-25?17:13:15.201?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?004?Using?default?vscc
??2019-08-25?17:13:15.544?CST?[chaincodeCmd]?install?->?INFO?005?Installed?remotely?response:<status:200?payload:"OK"?>

? ##peer0.org2.example.com

??export?CORE_PEER_LOCALMSPID="Org2MSP"
??export?CORE_PEER_ADDRESS=peer0.org2.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
??#peer?chaincode?install?-n?example2?-p?github.com/hyperledger/fabric/examples/chaincode/go/example02?-v?1.0?
??輸出：
??2019-08-25?17:15:16.573?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:15:16.577?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:15:16.581?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?003?Using?default?escc
??2019-08-25?17:15:16.581?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?004?Using?default?vscc
??2019-08-25?17:15:16.860?CST?[chaincodeCmd]?install?->?INFO?005?Installed?remotely?response:<status:200?payload:"OK"?>

? ##peer1.org2.example.com

??export?CORE_PEER_LOCALMSPID="Org2MSP"
??export?CORE_PEER_ADDRESS=peer1.org2.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
??#peer?chaincode?install?-n?example2?-p?github.com/hyperledger/fabric/examples/chaincode/go/example02?-v?1.0
??輸出：
??2019-08-25?17:16:43.117?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:16:43.121?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:16:43.124?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?003?Using?default?escc
??2019-08-25?17:16:43.124?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?004?Using?default?vscc
??2019-08-25?17:16:43.396?CST?[chaincodeCmd]?install?->?INFO?005?Installed?remotely?response:<status:200?payload:"OK"?>

? #恢復當前cli環境變量

??export?CORE_PEER_LOCALMSPID="Org1MSP"
??export?CORE_PEER_ADDRESS=peer0.org1.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp

十、實例化 Chaincode

? 1.第一節點(172.31.1.89)，進入cli容器,無論多少個 peer 節點, 實例化只需要實例化一次即可。

? # 實例化合約 (未認證)

??#peer?chaincode?instantiate?-o?orderer0.example.com:7050?-C?mychannel?-n?example2?-c?'{"Args":["init","A","200","B","500"]}'?-P?"OR?('Org1MSP.member','Org2MSP.member')"?-v?1.0
??輸出：
??2019-08-25?17:19:32.439?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:19:32.443?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:19:32.447?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?003?Using?default?escc
??2019-08-25?17:19:32.447?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?004?Using?default?vscc

? 2.操作智能合約

? # query 查詢方法

? # 查詢 A 賬戶里的余額

??#peer?chaincode?query?-C?mychannel?-n?example2?-c?'{"Args":["query","A"]}'
??輸出：
??2019-08-25?17:25:55.246?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:25:55.250?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??200

? # 查詢 B 賬戶里的余額

??#peer?chaincode?query?-C?mychannel?-n?example2?-c?'{"Args":["query","B"]}'
??輸出：
??2019-08-25?17:31:17.138?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:31:17.143?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??500

? # invoke 轉賬方法

? # 從A賬戶轉賬 100 個幣到 B 賬戶

??#peer?chaincode?invoke?-C?mychannel?-n?example2?-c?'{"Args":["invoke",?"A",?"B",?"100"]}'
??輸出：
??2019-08-25?17:34:39.040?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:34:39.045?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:34:39.054?CST?[chaincodeCmd]?InitCmdFactory?->?INFO?003?Retrieved?channel?(mychannel)?orderer?endpoint:?orderer0.example.com:7050
??2019-08-25?17:34:39.177?CST?[chaincodeCmd]?chaincodeInvokeOrQuery?->?INFO?004?Chaincode?invoke?successful.?result:?status:200

? # B 賬戶余額?

??#peer?chaincode?query?-C?mychannel?-n?example2?-c?'{"Args":["query","B"]}'??
??輸出：
??2019-08-25?17:35:40.335?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-25?17:35:40.339?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??600

? # 查看 peer0.org1.example.com 節點里生成的容器

??#?docker?ps?-a
??CONTAINER?ID????????IMAGE???????????????????????????????????????????????????????????????????????????????????????????????????????COMMAND??????????????????CREATED?????????????STATUS??????????????PORTS????????????????????????????????????????????????????????????????????NAMES
??a32b63ecbc06????????soft-peer0.org1.example.com-example2-1.0-d0878f91cfdef1f96b45622ea9fb58a5c15c5df7fa1c97e1f40fac8ce325793d???"chaincode?-peer.add…"???16?minutes?ago??????Up?15?minutes????????????????????????????????????????????????????????????????????????????????soft-peer0.org1.example.com-example2-1.0

十一、其他Hyperledger Fabric 常用操作命令，或者--help參數參考

? ? ? ? peer 命令

? ? ? ? peer chaincode? ? ? ? ? # 對鏈進行操作

? ? ? ? peer channel? ? ? ? ? ? # channel相關操作

? ? ? ? peer logging? ? ? ? ? ? # 設置日志級別

? ? ? ? peer node? ? ? ? ? ? ? ?# 啟動、管理節點

? ? ? ? peer version? ? ? ? ? ? # 查看版本信息

? ? ? ? # 查看已經創建的通道 (channel)

? ? ? ? peer channel? list

? ? ? ? # 查看通道(channel) 的狀態 -c(小寫) 加通道名稱

? ? ? ? peer channel getinfo -c mychannel

? ? ? ? # 查看已經安裝的智能合約(chincode)

? ? ? ? peer chaincode? list --installed

? ? ? ? # 查看已經實例化的智能合約(chincode) 需要使用 -C(大寫) 加通道名稱

? ? ? ? peer chaincode -C mychannel list --instantiated

十二、###########以下為測試驗證動態添加組織(未開啟tls認證)#############

? 場景：在已有上面2個組織，4個節點正在運行區塊鏈集群網絡下，需要動態新增組織、節點

? 總結歸納大致流程：

? ? ?

? ? -->為新 org 生成證書?

? ? -->為新 org 生成配置文件?

? ? -->生成和提交新 org 的配置?

? ? ? --> peer channel fetch config 獲取當前通道信息，生成增量包?

? ? ? --> peer channel signconfigtx 為配置交易簽名

? ? ? --> peer channel update 提交簽名后的配置交易至 orderer?

? ? -->將新 org 添加入 channel 通道

? ? ? -->啟動新 org 集群?

? ? ? -->peer channel join 將新 org 下的 peer 加入 channel?

? ? -->升級chaincode和背書策略

? ? ? -->peer chaincode install 為新 org 的 peer 安裝 chaincode?

? ? ? -->peer chaincode install 為原有org的peer升級 chaincode?

? ? ? -->peer chaincode upgrade 升級背書策略?

? ? -->交易查詢測試

? 1.初始化新增兩個節點服務器環境 (與上面節點服務器環境一致，如采用阿里云ECS可克隆其他服務器配置好的鏡像作為自定義鏡像)，模擬新增org3組織，新增兩個節點hosts 映射如下：

? 172.31.1.101 peer0.org3.example.com

? 172.31.1.102 peer1.org3.example.com

? 2.在第一節點(172.31.1.89)服務器上，重新生成證書文件,

? #進入/opt/soft目錄，存在crypto-config.yaml、configtx.yaml原先配置文件

#cd?/opt/soft?
??#?拷貝?crypto-config.yaml?新建一個證書配置文件，命名為crypto-config-org3.yaml，并修改為如下：
#?Copyright?IBM?Corp.?All?Rights?Reserved.
#
#?SPDX-License-Identifier:?Apache-2.0
#
PeerOrgs:
??#?---------------------------------------------------------------------------
??#?Org3
??#?---------------------------------------------------------------------------
??-?Name:?Org3
????Domain:?org3.example.com
????EnableNodeOUs:?true
????CA:
????????Country:?CN
????????Province:?GuangDong
????????Locality:?ShenZhen
????#?---------------------------------------------------------------------------
????#?"Specs"
????#?---------------------------------------------------------------------------
????#?Uncomment?this?section?to?enable?the?explicit?definition?of?hosts?in?your
????#?configuration.??Most?users?will?want?to?use?Template,?below
????#
????#?Specs?is?an?array?of?Spec?entries.??Each?Spec?entry?consists?of?two?fields:
????#???-?Hostname:???(Required)?The?desired?hostname,?sans?the?domain.
????#???-?CommonName:?(Optional)?Specifies?the?template?or?explicit?override?for
????#?????????????????the?CN.??By?default,?this?is?the?template:
????#
????#??????????????????????????????"{{.Hostname}}.{{.Domain}}"
????#
????#?????????????????which?obtains?its?values?from?the?Spec.Hostname?and
????#?????????????????Org.Domain,?respectively.
????#?---------------------------------------------------------------------------
????#?Specs:
????#???-?Hostname:?foo?#?implicitly?"foo.org1.example.com"
????#?????CommonName:?foo27.org5.example.com?#?overrides?Hostname-based?FQDN?set?above
????#???-?Hostname:?bar
????#???-?Hostname:?baz
????#?---------------------------------------------------------------------------
????#?"Template"
????#?---------------------------------------------------------------------------
????#?Allows?for?the?definition?of?1?or?more?hosts?that?are?created?sequentially
????#?from?a?template.?By?default,?this?looks?like?"peer%d"?from?0?to?Count-1.
????#?You?may?override?the?number?of?nodes?(Count),?the?starting?index?(Start)
????#?or?the?template?used?to?construct?the?name?(Hostname).
????#
????#?Note:?Template?and?Specs?are?not?mutually?exclusive.??You?may?define?both
????#?sections?and?the?aggregate?nodes?will?be?created?for?you.??Take?care?with
????#?name?collisions
????#?---------------------------------------------------------------------------
????Template:
??????Count:?2
??????#?Start:?5
??????#?Hostname:?{{.Prefix}}{{.Index}}?#?default
????#?---------------------------------------------------------------------------
????#?"Users"
????#?---------------------------------------------------------------------------
????#?Count:?The?number?of?user?accounts?_in?addition_?to?Admin
????#?---------------------------------------------------------------------------
????Users:
??????Count:?1

??##獲取新增組織證書
??[root@xxxx?soft]#cryptogen?generate?--config=./crypto-config-org3.yaml
??org3.example.com

? ##在configtx.yaml配置文件中新增創建通道的一些組織信息，新增組織在Organizations段中寫明，最后只增加了一個Org3

????-?&Org3
????????#?DefaultOrg?defines?the?organization?which?is?used?in?the?sampleconfig
????????#?of?the?fabric.git?development?environment
????????Name:?Org3MSP
????????#?ID?to?load?the?MSP?definition?as
????????ID:?Org3MSP
????????MSPDir:?crypto-config/peerOrganizations/org3.example.com/msp
????????AnchorPeers:
????????????#?AnchorPeers?defines?the?location?of?peers?which?can?be?used
????????????#?for?cross?org?gossip?communication.??Note,?this?value?is?only
????????????#?encoded?in?the?genesis?block?in?the?Application?section?context
????????????-?Host:?peer0.org3.example.com
??????????????Port:?7051

#######以下是創建新通道部分,本示例不示范################

對于新增通道，通道文件創建依賴于profiles，根據自己需要添加不同組織

Profiles:
????TwoOrgsOrdererGenesis:
????????Capabilities:
????????????<<:?*ChannelCapabilities
????????Orderer:
????????????<<:?*OrdererDefaults
????????????Organizations:
????????????????-?*OrdererOrg
????????????Capabilities:
????????????????<<:?*OrdererCapabilities
????????Consortiums:
????????????SampleConsortium:
????????????????Organizations:
????????????????????-?*Org1
????????????????????-?*Org2
????TwoOrgsChannel:
????????Consortium:?SampleConsortium
????????Application:
????????????<<:?*ApplicationDefaults
????????????Organizations:
????????????????-?*Org1
????????????????-?*Org2
????????????Capabilities:
????????????????<<:?*ApplicationCapabilities
????NewOrgsChannel:
????????Consortium:?SampleConsortium
????????Application:
????????????<<:?*ApplicationDefaults
????????????Organizations:
????????????????-?*Org1
????????????????-?*Org2
????????????????-?*Org3
????????????Capabilities:
????????????????<<:?*ApplicationCapabilities
????OneOrgsChannel:
????????Consortium:?SampleConsortium
????????Application:
????????????<<:?*ApplicationDefaults
????????????Organizations:
????????????????-?*Org3
????????????Capabilities:
????????????????<<:?*ApplicationCapabilities
??##獲取通道更新增量包?
??##根據新增組織獲取組織信息，注意Org3Msp必須與你在configtx.yaml中新增組織名稱一致?
??#configtxgen?-printOrg?Org3MSP?-profile?./configtx.yaml?>?channel-artifacts/org3.json
??輸出：
??2019-08-28?17:47:50.947?CST?[common.tools.configtxgen]?main?->?INFO?001?Loading?configuration
??2019-08-28?17:47:50.958?CST?[common.tools.configtxgen.localconfig]?completeInitialization?->?INFO?002?orderer?type:?kafka
??2019-08-28?17:47:50.958?CST?[common.tools.configtxgen.localconfig]?LoadTopLevel?->?INFO?003?Loaded?configuration:?/opt/soft/configtx.yaml
??[root@xxx?channel-artifacts]#?ll
??-rw-r--r--?1?root?root???346?Aug?25?02:26?channel.tx
??-rw-r--r--?1?root?root?12906?Aug?25?02:25?genesis.block
??-rw-r--r--?1?root?root???284?Aug?25?02:28?Org1MSPanchors.tx
??-rw-r--r--?1?root?root???284?Aug?25?02:28?Org2MSPanchors.tx
??-rw-r--r--?1?root?root??8484?Aug?28?17:47?org3.json

? 3.進入cli容器，拉取通道二進制文件并且轉換為json格式

? #docker exec -it cli bash

??#認證未開啟
??如tls是關閉的，執行
??#peer?channel?fetch?config?mychannel.pb?-o?orderer0.example.com:7050?-c?mychannel
??#configtxlator?proto_decode?--input?mychannel.pb?--type?common.Block?|?jq?.data.data[0].payload.data.config?>?mychannel.json

? #將之前獲取的新增組織信息加入到通道信息json文件

#jq?-s?'.[0]?*?{"channel_group":{"groups":{"Application":{"groups":?{"Org3MSP":.[1]}}}}}'?mychannel.json?./channel-artifacts/org3.json?>?mychannel_config.json
??輸出：
??root@ae3f95d0f32d:/opt/gopath/src/github.com/hyperledger/fabric/peer#?ll
??.............
??drwxr-xr-x??2?root?root??4096?Aug?25?02:06?mocks/
??-rw-r--r--??1?root?root?15874?Aug?25?16:28?mychannel.block
??-rw-r--r--??1?root?root?35653?Aug?28?18:09?mychannel.json
??-rw-r--r--??1?root?root?16869?Aug?28?18:07?mychannel.pb
??-rw-r--r--??1?root?root?46704?Aug?28?18:24?mychannel_config.json

? #把更新前后的文件打包成二進制文件

#configtxlator?proto_encode?--input?mychannel.json?--type?common.Config?>?original_mychannel.pb
??#configtxlator?proto_encode?--input?mychannel_config.json?--type?common.Config?>?modified_mychannel.pb
??輸出：
??root@ae3f95d0f32d:/opt/gopath/src/github.com/hyperledger/fabric/peer#?ll
??..............
??drwxr-xr-x??2?root?root??4096?Aug?25?02:06?mocks/
??-rw-r--r--??1?root?root?17369?Aug?28?18:26?modified_mychannel.pb
??-rw-r--r--??1?root?root?15874?Aug?25?16:28?mychannel.block
??-rw-r--r--??1?root?root?35653?Aug?28?18:09?mychannel.json
??-rw-r--r--??1?root?root?16869?Aug?28?18:07?mychannel.pb
??-rw-r--r--??1?root?root?46704?Aug?28?18:24?mychannel_config.json
??drwxr-xr-x??3?root?root??4096?Aug?25?02:06?node/
??-rw-r--r--??1?root?root?12853?Aug?28?18:26?original_mychannel.pb

? #獲取增量包并且補全，轉換成二進制文件

??#configtxlator?compute_update?--channel_id?mychannel?--original?original_mychannel.pb?--updated?modified_mychannel.pb?>?mychannel_update.pb
??#configtxlator?proto_decode?--input?mychannel_update.pb??--type?common.ConfigUpdate?>?mychannel_update.json
??#echo?'{"payload":{"header":{"channel_header":{"channel_id":"mychannel",?"type":2}},"data":{"config_update":'$(cat?mychannel_update.json)'}}}'?|?jq?.?>?mychannel_update_envelope.json
??#configtxlator?proto_encode?--input?mychannel_update_envelope.json?--type?common.Envelope?>?mychannel_update_Org_envelope.pb
??輸出：
??root@ae3f95d0f32d:/opt/gopath/src/github.com/hyperledger/fabric/peer#?ll
??..............
??-rw-r--r--??1?root?root??1561?Aug?25?02:06?main_test.go
??drwxr-xr-x??2?root?root??4096?Aug?25?02:06?mocks/
??-rw-r--r--??1?root?root?17369?Aug?28?18:26?modified_mychannel.pb
??-rw-r--r--??1?root?root?15874?Aug?25?16:28?mychannel.block
??-rw-r--r--??1?root?root?35653?Aug?28?18:09?mychannel.json
??-rw-r--r--??1?root?root?16869?Aug?28?18:07?mychannel.pb
??-rw-r--r--??1?root?root?46704?Aug?28?18:24?mychannel_config.json
??-rw-r--r--??1?root?root?11149?Aug?28?18:28?mychannel_update.json
??-rw-r--r--??1?root?root??4751?Aug?28?18:28?mychannel_update.pb
??-rw-r--r--??1?root?root??4777?Aug?28?18:29?mychannel_update_Org_envelope.pb
??-rw-r--r--??1?root?root?15177?Aug?28?18:28?mychannel_update_envelope.json
??drwxr-xr-x??3?root?root??4096?Aug?25?02:06?node/
??-rw-r--r--??1?root?root?12853?Aug?28?18:26?original_mychannel.pb

? 4.原有組織對新加組織進行簽名已獲取認可，必須使用Org1MSP、Org2MSP admin用戶

??export?CORE_PEER_LOCALMSPID="Org1MSP"
??export?CORE_PEER_ADDRESS=peer0.org1.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
??#peer?channel?signconfigtx?-f?mychannel_update_Org_envelope.pb
??輸出：
??2019-08-28?18:52:07.273?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?18:52:07.277?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?18:52:07.277?CST?[channelCmd]?InitCmdFactory?->?INFO?003?Endorser?and?orderer?connections?initialized
??export?CORE_PEER_LOCALMSPID="Org2MSP"
??export?CORE_PEER_ADDRESS=peer0.org2.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
??#peer?channel?signconfigtx?-f?mychannel_update_Org_envelope.pb
??輸出：
??2019-08-28?18:53:15.765?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?18:53:15.770?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?18:53:15.770?CST?[channelCmd]?InitCmdFactory?->?INFO?003?Endorser?and?orderer?connections?initialized

? 5.獲取簽名之后通知orderer更新通道信息

??#未開啟認證
??#peer?channel?update?-f?mychannel_update_Org_envelope.pb?-c?mychannel?-o?orderer0.example.com:7050
??報錯：
??2019-08-28?18:59:52.082?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?18:59:52.086?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??Error:?failed?to?create?deliver?client:?orderer?client?failed?to?connect?to?orderer0.exeample.com:7050:?failed?to?create?new?connection:?context?deadline?exceeded
??解決方案：發現寫錯了orderer0.exeample.com:7050，其實是orderer0.example.com:7050
??修正后輸出：
??2019-08-28?19:17:33.604?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?19:17:33.608?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?19:17:33.609?CST?[channelCmd]?InitCmdFactory?->?INFO?003?Endorser?and?orderer?connections?initialized
??2019-08-28?19:17:33.747?CST?[channelCmd]?update?->?INFO?004?Successfully?submitted?channel?update

? 6.配置org3的yaml文件，并上傳172.31.1.101、172.31.1.102服務器，啟動服務。

? #172.31.1.101 --->peer0.org3.example.com----->docker-compose-peer.yaml

? #新增172.31.1.101節點，docker-compose-peer.yaml文件配置如下：

version:?'2'
?
services:
??couchdb4:
????container_name:?couchdb4
????image:?hyperledger/fabric-couchdb
????environment:
??????-?COUCHDB_USER=
??????-?COUCHDB_PASSWORD=
????ports:
??????-?"5984:5984"
????volumes:
??????#?數據持久化，用于存儲鏈碼值
??????-?/mnt/data/couchdb4/data:/opt/couchdb/data
??peer0.org3.example.com:
????container_name:?peer0.org3.example.com
????hostname:?peer0.org3.example.com
????image:?hyperledger/fabric-peer
????environment:
??????-?CORE_LEDGER_STATE_STATEDATABASE=CouchDB
??????-?CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb4:5984????
??????-?CORE_PEER_ID=peer0.org3.example.com
??????-?CORE_PEER_NETWORKID=soft
??????-?CORE_PEER_ADDRESS=peer0.org3.example.com:7051
??????-?CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org3.example.com:7051
??????-?CORE_PEER_LOCALMSPID=Org3MSP
??????-?CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft
??????-?CORE_LOGGING_LEVEL=DEBUG
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft_default
??????-?CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
??????-?CORE_PEER_GOSSIP_USELEADERELECTION=true
??????-?CORE_PEER_GOSSIP_ORGLEADER=false
??????-?CORE_PEER_PROFILE_ENABLED=false
??????-?CORE_CHAINCODE_EXECUTETIMEOUT=1000s
??????-?CORE_CHAINCODE_DEPLOYTIMEOUT=1000s
??????-?CORE_PEER_TLS_ENABLED=false
??????-?CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
??????-?CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
??????-?CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
????working_dir:?/opt/gopath/src/github.com/hyperledger/fabric/peer
????command:?peer?node?start
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro?????
??????-?/var/run/:/host/var/run/
??????-?/var/hyperledger/peer_data/:/var/hyperledger/production/
??????-?./crypto-config/peerOrganizations/org3.example.com/peers/peer0.org3.example.com/msp:/etc/hyperledger/fabric/msp
??????-?./crypto-config/peerOrganizations/org3.example.com/peers/peer0.org3.example.com/tls:/etc/hyperledger/fabric/tls
????ports:
??????-?7051:7051
??????-?7052:7052
??????-?7053:7053
????depends_on:
??????-?couchdb4
????extra_hosts:
??????-?"couchdb4:172.31.1.101"
??????-?"orderer0.example.com:172.31.1.89"
??????-?"orderer1.example.com:172.31.1.90"
??????-?"orderer2.example.com:172.31.1.91"

? #172.31.1.102 --->peer1.org3.example.com----->docker-compose-peer.yaml

? #新增172.31.1.102節點，docker-compose-peer.yaml文件配置如下：

version:?'2'
?
services:
??couchdb5:
????container_name:?couchdb5
????image:?hyperledger/fabric-couchdb
????environment:
??????-?COUCHDB_USER=
??????-?COUCHDB_PASSWORD=
????ports:
??????-?"5984:5984"
????volumes:
??????#?數據持久化，用于存儲鏈碼值
??????-?/mnt/data/couchdb5/data:/opt/couchdb/data
??peer1.org3.example.com:
????container_name:?peer1.org3.example.com
????hostname:?peer1.org3.example.com
????image:?hyperledger/fabric-peer
????environment:
??????-?CORE_LEDGER_STATE_STATEDATABASE=CouchDB
??????-?CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb5:5984????
??????-?CORE_PEER_ID=peer1.org3.example.com
??????-?CORE_PEER_NETWORKID=soft
??????-?CORE_PEER_ADDRESS=peer1.org3.example.com:7051
??????-?CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org3.example.com:7051
??????-?CORE_PEER_LOCALMSPID=Org3MSP
??????-?CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft
??????-?CORE_LOGGING_LEVEL=DEBUG
??????-?CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=soft_default
??????-?CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
??????-?CORE_PEER_GOSSIP_USELEADERELECTION=true
??????-?CORE_PEER_GOSSIP_ORGLEADER=false
??????-?CORE_PEER_PROFILE_ENABLED=false
??????-?CORE_CHAINCODE_EXECUTETIMEOUT=1000s
??????-?CORE_CHAINCODE_DEPLOYTIMEOUT=1000s
??????-?CORE_PEER_TLS_ENABLED=false
??????-?CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
??????-?CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
??????-?CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
????working_dir:?/opt/gopath/src/github.com/hyperledger/fabric/peer
????command:?peer?node?start
????volumes:
??????-?/etc/localtime:/etc/localtime:ro
??????-?/etc/timezone:/etc/timezone:ro?????
??????-?/var/run/:/host/var/run/
??????-?/var/hyperledger/peer_data/:/var/hyperledger/production/
??????-?./crypto-config/peerOrganizations/org3.example.com/peers/peer1.org3.example.com/msp:/etc/hyperledger/fabric/msp
??????-?./crypto-config/peerOrganizations/org3.example.com/peers/peer1.org3.example.com/tls:/etc/hyperledger/fabric/tls
????ports:
??????-?7051:7051
??????-?7052:7052
??????-?7053:7053
????depends_on:
??????-?couchdb5
????extra_hosts:
??????-?"couchdb5:172.31.1.102"
??????-?"orderer0.example.com:172.31.1.89"
??????-?"orderer1.example.com:172.31.1.90"
??????-?"orderer2.example.com:172.31.1.91"

? ? #從 172.31.1.89 節點/opt/soft，拷貝channel-artifacts，crypto-config 目錄文件至172.31.1.101、172.31.1.102服務器，/opt/soft目錄下

??scp?-r?crypto-config?channel-artifacts?root@172.31.1.101:/opt/soft
??scp?-r?crypto-config?channel-artifacts?root@172.31.1.102:/opt/soft

? #更新其他所有節點服務器的channel-artifacts，crypto-config，防止peer或orderer發生重啟時加載不到最新文件

??scp?-r?crypto-config?channel-artifacts?root@172.31.1.90:/opt/soft
??scp?-r?crypto-config?channel-artifacts?root@172.31.1.91:/opt/soft
??scp?-r?crypto-config?channel-artifacts?root@172.31.1.92:/opt/soft

??#啟動
??#docker-compose?-f?docker-compose-peer.yaml?up?-d

? 7.修改第一節點(172.31.1.89),/opt/soft目錄下對 docker-compose-cli.yaml 文件增加配置修改，并重啟cli服務

? #修改增加peer0.org3.example.com:172.31.1.101、peer1.org3.example.com:172.31.1.102 extra_hosts

??extra_hosts:
??????-?"orderer0.example.com:172.31.1.89"
??????-?"orderer1.example.com:172.31.1.90"
??????-?"orderer2.example.com:172.31.1.91"
??????-?"peer0.org1.example.com:172.31.1.89"
??????-?"peer1.org1.example.com:172.31.1.90"
??????-?"peer0.org2.example.com:172.31.1.91"
??????-?"peer1.org2.example.com:172.31.1.92"
??????-?"peer0.org3.example.com:172.31.1.101"
??????-?"peer1.org3.example.com:172.31.1.102"

??#重啟構建??????
??#docker-compose?-f?docker-compose-cli.yaml?up?-d

? 8.Org3MSP加入通道，進入172.31.1.89 cli容器?

? #切換到org3的節點上環境變量然后執行peer channel join 加入通道

??export?CORE_PEER_LOCALMSPID="Org3MSP"
??export?CORE_PEER_ADDRESS=peer0.org3.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org3.example.com/peers/peer0.org3.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org3.example.com/users/Admin@org3.example.com/msp
??#peer?channel?join?-b?mychannel.block
??輸出：
??2019-08-28?20:24:13.880?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:24:13.884?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:24:13.885?CST?[channelCmd]?InitCmdFactory?->?INFO?003?Endorser?and?orderer?connections?initialized
??2019-08-28?20:24:14.104?CST?[channelCmd]?executeJoin?->?INFO?004?Successfully?submitted?proposal?to?join?channel

? 9.更新鏈碼 (所有peer節點(現有6個節點)上的鏈碼都必須重新安裝！！！！！)

? #在新增org3的所有節點上安裝鏈碼，版本號為2.0(注意是所有節點都要)

??#peer0.org3.example.com
??export?CORE_PEER_LOCALMSPID="Org3MSP"
??export?CORE_PEER_ADDRESS=peer0.org3.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org3.example.com/peers/peer0.org3.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org3.example.com/users/Admin@org3.example.com/msp
??peer?chaincode?install?-n?example2?-p?github.com/hyperledger/fabric/examples/chaincode/go/example02?-v?2.0???
??輸出：
??2019-08-28?20:28:33.592?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:28:33.596?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:28:33.600?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?003?Using?default?escc
??2019-08-28?20:28:33.600?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?004?Using?default?vscc
??2019-08-28?20:28:33.903?CST?[chaincodeCmd]?install?->?INFO?005?Installed?remotely?response:<status:200?payload:"OK"?>?
??#peer1.org3.example.com
??export?CORE_PEER_LOCALMSPID="Org3MSP"
??export?CORE_PEER_ADDRESS=peer1.org3.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org3.example.com/peers/peer1.org3.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org3.example.com/users/Admin@org3.example.com/msp
??#peer?chaincode?install?-n?example2?-p?github.com/hyperledger/fabric/examples/chaincode/go/example02?-v?2.0
??輸出：
??2019-08-28?20:33:16.276?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:33:16.280?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:33:16.284?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?003?Using?default?escc
??2019-08-28?20:33:16.284?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?004?Using?default?vscc
??2019-08-28?20:33:16.565?CST?[chaincodeCmd]?install?->?INFO?005?Installed?remotely?response:<status:200?payload:"OK"?>?
??#切換環境變量到原有的org1和org2上分別所有節點更新鏈碼，版本號必須對應(注意是所有節點都要更新)
??#切換到org1環境變量
??peer0.org1.example.com
??export?CORE_PEER_LOCALMSPID="Org1MSP"
??export?CORE_PEER_ADDRESS=peer0.org1.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
??#peer?chaincode?install?-n?example2?-p?github.com/hyperledger/fabric/examples/chaincode/go/example02?-v?2.0
??輸出：
??2019-08-28?20:36:58.948?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:36:58.952?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:36:58.955?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?003?Using?default?escc
??2019-08-28?20:36:58.955?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?004?Using?default?vscc
??2019-08-28?20:36:59.228?CST?[chaincodeCmd]?install?->?INFO?005?Installed?remotely?response:<status:200?payload:"OK"?>?
??peer1.org1.example.com
??export?CORE_PEER_LOCALMSPID="Org1MSP"
??export?CORE_PEER_ADDRESS=peer1.org1.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
??#peer?chaincode?install?-n?example2?-p?github.com/hyperledger/fabric/examples/chaincode/go/example02?-v?2.0
??輸出：
??2019-08-28?20:38:04.091?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:38:04.095?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:38:04.098?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?003?Using?default?escc
??2019-08-28?20:38:04.098?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?004?Using?default?vscc
??2019-08-28?20:38:04.372?CST?[chaincodeCmd]?install?->?INFO?005?Installed?remotely?response:<status:200?payload:"OK"?
??peer0.org2.example.com
??export?CORE_PEER_LOCALMSPID="Org2MSP"
??export?CORE_PEER_ADDRESS=peer0.org2.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
??#peer?chaincode?install?-n?example2?-p?github.com/hyperledger/fabric/examples/chaincode/go/example02?-v?2.0
??輸出：
??2019-08-28?20:39:35.826?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:39:35.830?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:39:35.834?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?003?Using?default?escc
??2019-08-28?20:39:35.834?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?004?Using?default?vscc
??2019-08-28?20:39:36.110?CST?[chaincodeCmd]?install?->?INFO?005?Installed?remotely?response:<status:200?payload:"OK"?>?
??peer1.org2.example.com
??export?CORE_PEER_LOCALMSPID="Org2MSP"
??export?CORE_PEER_ADDRESS=peer1.org2.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
??#peer?chaincode?install?-n?example2?-p?github.com/hyperledger/fabric/examples/chaincode/go/example02?-v?2.0
??輸出：
??2019-08-28?20:40:35.467?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:40:35.471?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:40:35.475?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?003?Using?default?escc
??2019-08-28?20:40:35.475?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?004?Using?default?vscc
??2019-08-28?20:40:35.747?CST?[chaincodeCmd]?install?->?INFO?005?Installed?remotely?response:<status:200?payload:"OK"?>

? 10.更新背書策略，在原有的兩個組織策略上增加新增組織

? #第一節點(172.31.1.89),進入cli 容器，切換到org1環境變量

peer0.org1.example.com
??export?CORE_PEER_LOCALMSPID="Org1MSP"
??export?CORE_PEER_ADDRESS=peer0.org1.example.com:7051
??export?CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
??export?CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp

#認證未開啟
??#peer?chaincode?upgrade?-o?orderer0.example.com:7050?-C?mychannel?-n?example2?-v?2.0?-c?'{"Args":["init","A","100","B","50"]}'?-P?"OR?('Org1MSP.peer','Org2MSP.peer','Org3MSP.peer')"?
??#?舊版本的合約,?目前，fabric不支持合約的啟動與暫停。要暫停或刪除合約，只能到peer上手動刪除容器。
??2019-08-28?20:47:05.750?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:47:05.754?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:47:05.758?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?003?Using?default?escc
??2019-08-28?20:47:05.758?CST?[chaincodeCmd]?checkChaincodeCmdParams?->?INFO?004?Using?default?vscc

? 11.測試查詢

? # 這里再查詢 A 與 B 的賬戶

? # A 賬戶余額?

??#peer?chaincode?query?-C?mychannel?-n?example2?-c?'{"Args":["query","A"]}'
??輸出：
??2019-08-28?20:49:13.846?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:49:13.850?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??100
??#?peer?chaincode?query?-C?mychannel?-n?example2?-c?'{"Args":["query","B"]}'
??輸出：
??2019-08-28?20:49:31.416?CST?[main]?InitCmd?->?WARN?001?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??2019-08-28?20:49:31.420?CST?[main]?SetOrdererEnv?->?WARN?002?CORE_LOGGING_LEVEL?is?no?longer?supported,?please?use?the?FABRIC_LOGGING_SPEC?environment?variable
??50

? 12.(非必要)暴露相應排序orderer/peer對外地址，可供外部SDK訪問上鏈

??orderer0.example.com??7050??112.xxx.xxx.xxx:13150
??orderer1.example.com??7050??112.xxx.xxx.xxx:13151
??orderer2.example.com??7050??112.xxx.xxx.xxx:13152
??peer0.org1.example.com??7051???112.xxx.xxx.xxx:13250
??peer1.org1.example.com??7051???112.xxx.xxx.xxx:13251
??peer0.org2.example.com??7051???112.xxx.xxx.xxx:13252
??peer1.org2.example.com??7051???112.xxx.xxx.xxx:13253

向AI問一下細節

中文字幕av专区_日韩电影在线播放_精品国产精品久久一区免费式_av在线免费观看网站

fabric v1.4 kafka模式(未開啟TLS)，多節點服務器部署，實現動態添加組織

猜你喜歡

中文字幕av专区_日韩电影在线播放_精品国产精品久久一区免费式_av在线免费观看网站

fabric v1.4 kafka模式(未開啟TLS)，多節點服務器部署，實現動態添加組織

猜你喜歡

最新資訊

相關推薦

相關標簽