溫馨提示×
您好，登錄后才能下訂單哦！
點擊 登錄注冊 即表示同意《億速云用戶服務條款》
您好，登錄后才能下訂單哦！
這篇文章主要介紹了Linux下如何安裝SVN服務端，具有一定借鑒價值，感興趣的朋友可以參考下，希望大家閱讀完這篇文章之后大有收獲，下面讓小編帶著大家一起了解一下。
SVN是一個應用分支管理的開源的版本控制系統，能用于多個人同時開發一個項目，達到資源共享，實現集中管理的目的。
一、yum 安裝
1 | yum install subversion |
二、配置
1、創建倉庫
我們在/home下建立一個名為svn的倉庫（repository），以后所有代碼都放在這個下面，創建成功后在svn下面多了幾個文件夾。
1 2 3 4 5 | [root@localhost /]# cd /home[root@localhost home]# mkdir svn[root@localhost home]# svnadmin create /home/svn[root@localhost home]# ls svnconf db format hooks locks README.txt |
conf文件夾，是存放配置文件的
1 2 3 | [root@localhost home]# cd svn/conf[root@localhost conf]# lsauthz passwd svnserve.conf |
authz 是權限控制文件
passwd 是帳號密碼文件
svnserve.conf 是SVN服務配置文件
2、配置passwd 文件
1 2 3 4 5 6 7 8 9 10 11 12 | [root@localhost conf]# vim passwd ### This file is an example password file for svnserve.### Its format is similar to that of svnserve.conf. As shown in the### example below it contains one section labelled [users].### The name and password for each user follow, one account per line.[users]# harry = harryssecret# sally = sallyssecretuser1=123456user2=123456 |
3、配置authz
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 | [root@localhost conf]# vim authz ### This file is an example authorization file for svnserve.### Its format is identical to that of mod_authz_svn authorization### files.### As shown below each section defines authorizations for the path and### (optional) repository specified by the section name.### The authorizations follow. An authorization line can refer to:### - a single user,### - a group of users defined in a special [groups] section,### - an alias defined in a special [aliases] section,### - all authenticated users, using the '$authenticated' token,### - only anonymous users, using the '$anonymous' token,### - anyone, using the '*' wildcard.###### A match can be inverted by prefixing the rule with '~'. Rules can### grant read ('r') access, read-write ('rw') access, or no access### ('').[aliases]# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average[groups]# harry_and_sally = harry,sally# harry_sally_and_joe = harry,sally,&joe# [/foo/bar]# harry = rw# &joe = r# * =# [repository:/baz/fuz]# @harry_and_sally = rw# * = r[/]user1=rwuser2=r*=~ |
4、配置svnserve.conf
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 | [root@localhost conf]# vim svnserve.conf ### This file controls the configuration of the svnserve daemon, if you### use it to allow access to this repository. (If you only allow### access through http: and/or file: URLs, then this file is### irrelevant.)### Visit http://subversion.apache.org/ for more information.[general]### The anon-access and auth-access options control access to the### repository for unauthenticated (a.k.a. anonymous) users and### authenticated users, respectively.### Valid values are "write", "read", and "none".### Setting the value to "none" prohibits both reading and writing;### "read" allows read-only access, and "write" allows complete ### read/write access to the repository.### The sample settings below are the defaults and specify that anonymous### users have read-only access to the repository, while authenticated### users have read and write access to the repository.anon-access = readauth-access = write### The password-db option controls the location of the password### database file. Unless you specify a path starting with a /,### the file's location is relative to the directory containing### this configuration file.### If SASL is enabled (see below), this file will NOT be used.### Uncomment the line below to use the default password file.password-db = passwd### The authz-db option controls the location of the authorization### rules for path-based access control. Unless you specify a path### starting with a /, the file's location is relative to the the### directory containing this file. If you don't specify an### authz-db, no path-based access control is done.### Uncomment the line below to use the default authorization file.authz-db = authz### This option specifies the authentication realm of the repository.### If two repositories have the same authentication realm, they should### have the same password database, and vice versa. The default realm### is repository's uuid.# realm = My First Repositoryrealm = /home/svn### The force-username-case option causes svnserve to case-normalize### usernames before comparing them against the authorization rules in the### authz-db file configured above. Valid values are "upper" (to upper-### case the usernames), "lower" (to lowercase the usernames), and### "none" (to compare usernames as-is without case conversion, which### is the default behavior).# force-username-case = none[sasl]### This option specifies whether you want to use the Cyrus SASL### library for authentication. Default is false.### This section will be ignored if svnserve is not built with Cyrus |
最后一行的realm記得改成你的svn目錄
打開注釋時切記前面不要留有空格
三、啟動與停止
1 2 | [root@localhost conf]# svnserve -d -r /home/svn（啟動）[root@localhost conf]#kill all svnserve（停止） |
感謝你能夠認真閱讀完這篇文章，希望小編分享的“Linux下如何安裝SVN服務端”這篇文章對大家有幫助，同時也希望大家多多支持億速云，關注億速云行業資訊頻道，更多相關知識等著你來學習!
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
