SOLARIS IPMP如何配置

這篇文章主要介紹了SOLARIS IPMP如何配置，具有一定借鑒價值，感興趣的朋友可以參考下，希望大家閱讀完這篇文章之后大有收獲，下面讓小編帶著大家一起了解一下。

IPMP配置

類型一：IPMP組內所有網卡均啟用
IP規劃如下：
e1000g0：數據IP：192.168.77.1 測試IP：192.168.77.11
e1000g1：數據IP：192.168.77.2 測試IP：192.168.77.22

# ifconfig e1000g0 group test_ipmp
# ifconfig e1000g1 group test_ipmp

# ifconfig e1000g0 addif 192.168.77.11 netmask + broadcast + -failover deprecated up
# ifconfig e1000g0 addif 192.168.77.22 netmask + broadcast + -failover deprecated up

或者（永久生效）
# cat /etc/hostname.e1000g0
192.168.77.1 netmask + broadcast + group test_ipmp up \
addif 192.168.77.11 deprecated -failover netmask + broadcast + up

# cat /etc/hostname.e1000g1
192.168.85.2 netmask + broadcast + group test_ipmp up \
addif 192.168.77.22 deprecated -failover netmask + broadcast + up

類型二：IPMP組內部分網卡設置為standby（待機）接口

設置IPMP為待機接口時，作為standby的網卡只設置測試IP

IP規劃如下：
e1000g0：數據IP：192.168.77.1 測試IP：192.168.77.11
e1000g1：測試IP：192.168.77.22

# ifconfig e1000g0 group test_ipmp
# ifconfig e1000g1 group test_ipmp
# ifconfig e1000g0 addif 192.168.77.11 netmask + broadcast + -failover deprecated up
# ifconfig e1000g1 plumb 192.168.77.22 netmask + broadcast + deprecated -failover standby up

或者（永久生效）
# cat /etc/hostname.e1000g0
192.168.77.1 group test_ipmp netmask + broadcast + up \
addif 192.168.77.11 netmask + broadcast + -failover deprecated up

# cat /etc/hostname.e1000g1
192.168.77.22 group test_ipmp netmask + broadcast + deprecated -failover standby up

重啟網卡生效
# ifconfig e1000g0 unplumb
# ifconfig e1000g1 unplumb
# ifconfig e1000g0 plumb
# ifconfig e1000g1 plumb
# svcadm restart physical
# ifconfig -a
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 14
        inet 192.168.77.1 netmask ffffff00 broadcast 192.168.77.255
        groupname test_ipmp
        ether 0:c:29:c8:6d:b4
e1000g0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 14
        inet 192.168.77.11 netmask ffffff00 broadcast 192.168.77.255
e1000g1: flags=69040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE> mtu 1500 index 13
        inet 192.168.77.22 netmask ffffff00 broadcast 192.168.77.255
        groupname test_ipmp
        ether 0:c:29:c8:6d:be

注意：此時e1000g1網卡是STANDBY,INACTIVE的！

模擬故障：
bash-3.00# if_mpadm -d e1000g0   #停用e1000g0網卡
bash-3.00# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
e1000g0: flags=89000842<BROADCAST,RUNNING,MULTICAST,IPv4,NOFAILOVER,OFFLINE> mtu 0 index 14
        inet 0.0.0.0 netmask 0
        groupname test_ipmp
        ether 0:c:29:c8:6d:b4
e1000g0:1: flags=89040842<BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,OFFLINE> mtu 1500 index 14
        inet 192.168.77.11 netmask ffffff00 broadcast 192.168.77.255
e1000g1: flags=29040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY> mtu 1500 index 13
        inet 192.168.77.22 netmask ffffff00 broadcast 192.168.77.255
        groupname test_ipmp
        ether 0:c:29:c8:6d:be
e1000g1:1: flags=21000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,STANDBY> mtu 1500 index 13
        inet 192.168.77.1 netmask ffffff00 broadcast 192.168.77.255
在IPMP切換時，故障網卡會分配一個0.0.0.0的偽IP！

感謝你能夠認真閱讀完這篇文章，希望小編分享的“SOLARIS IPMP如何配置”這篇文章對大家有幫助，同時也希望大家多多支持億速云，關注億速云行業資訊頻道，更多相關知識等著你來學習!