中文字幕av专区_日韩电影在线播放_精品国产精品久久一区免费式_av在线免费观看网站

溫馨提示×

溫馨提示×

您好，登錄后才能下訂單哦！

密碼登錄×
登錄注冊×
其他方式登錄
點擊 登錄注冊 即表示同意《億速云用戶服務條款》

k8s,Kubernetes環境搭建，集群搭建，1個mster，2個node

發布時間：2020-05-30 20:10:46 來源：網絡 閱讀：1670 作者：不算很酷 欄目：云計算

安裝虛擬機

1.安裝3臺虛擬機，或者使用其他物理機都OK；
2.三臺IP地址分別為：192.168.222.135,192.168.222.139,192.168.222.140
2.設置hostname，master節點設置

hostnamectl set-hostname master

3.兩個node節點設置

hostnamectl set-hostname node1

4.退出shell重新登錄

安裝組件

1.在三臺服務器上都安裝docker、kubelet、kubeadm、kubectl，這里有個腳本，大家可以拿來使用。

 ~]# vi setup.sh
 以下內容復制進文件
 #/bin/sh

# install some tools
sudo yum install -y vim telnet bind-utils wget

sudo bash -c 'cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF'

# install and start docker
sudo yum install -y docker
sudo systemctl enable docker && sudo systemctl start docker
# Verify docker version is 1.12 and greater.

sudo setenforce 0

# install kubeadm, kubectl, and kubelet.
sudo yum install -y kubelet kubeadm kubectl

sudo bash -c 'cat <<EOF >  /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward=1
EOF'
sudo sysctl --system

sudo systemctl stop firewalld
sudo systemctl disable firewalld
sudo swapoff -a
sudo systemctl enable kubelet && sudo systemctl start kubelet

2.將setup.sh復制到另外兩臺服務器上

scp setup.sh root@192.168.222.139:/root/
scp setup.sh root@192.168.222.140:/root/

3.分別在三臺服務器上執行這個腳本,腳本其實就是安裝一些組件，大家都應該能看得懂。

sh setup.sh

安裝確認

分別在三臺機器上運行以下命令，確認是否安裝完畢需要的組件

[root@node2 ~]# which kubeadm
/usr/bin/kubeadm
[root@node2 ~]# which kubelet
/usr/bin/kubelet
[root@node2 ~]# which kubectl
/usr/local/bin/kubectl
[root@node2 ~]# docker version
Client:
 Version:         1.13.1
 API version:     1.26
 Package version: docker-1.13.1-94.gitb2f74b2.el7.centos.x86_64
 Go version:      go1.10.3
 Git commit:      b2f74b2/1.13.1
 Built:           Tue Mar 12 10:27:24 2019
 OS/Arch:         linux/amd64

Server:
 Version:         1.13.1
 API version:     1.26 (minimum version 1.12)
 Package version: docker-1.13.1-94.gitb2f74b2.el7.centos.x86_64
 Go version:      go1.10.3
 Git commit:      b2f74b2/1.13.1
 Built:           Tue Mar 12 10:27:24 2019
 OS/Arch:         linux/amd64
 Experimental:    false

確認沒問題后進入下一個步驟

master配置

1.主節點上進行kubeadmin init

sudo kubeadm init --pod-network-cidr 172.100.0.0/16 --apiserver-advertise-address 192.168.222.135 
#--pod-network-cidr：pod節點的網段
#--apiserver-advertise-address：apiserver的IP地址，這里寫成master節點的IP即可
#-**-apiserver-cert-extra-sans: 如果需要使用公網IP，加上這一條，并且后面加上你的公網IP地址**

2.如果發現拉取鏡像失敗，我是拉取失敗了~~~~ 所以去百度了一下，我們通過 docker.io/mirrorgooglecontainers 中轉一下，運行以下命令，直接復制即可

kubeadm config images list |sed -e 's/^/docker pull /g' -e 's#k8s.gcr.io#docker.io/mirrorgooglecontainers#g' |sh -x
docker images |grep mirrorgooglecontainers |awk '{print "docker tag ",$1":"$2,$1":"$2}' |sed -e 's#docker.io/mirrorgooglecontainers#k8s.gcr.io#2' |sh -x
docker images |grep mirrorgooglecontainers |awk '{print "docker rmi ", $1":"$2}' |sh -x
docker pull coredns/coredns:1.2.2
docker tag coredns/coredns:1.2.2 k8s.gcr.io/coredns:1.3.1
docker rmi coredns/coredns:1.2.2

查看鏡像列表，沒毛病，如果發現init還報錯的話，按照kubeadm的報錯信息更改下docker鏡像的tag，具體各位百度下吧

[root@master ~]# docker images
REPOSITORY                           TAG                 IMAGE ID            CREATED             SIZE
k8s.gcr.io/kube-proxy                v1.14.1             20a2d7035165        2 days ago          82.1 MB
k8s.gcr.io/kube-apiserver            v1.14.1             cfaa4ad74c37        2 days ago          210 MB
k8s.gcr.io/kube-controller-manager   v1.14.1             efb3887b411d        2 days ago          158 MB
k8s.gcr.io/kube-scheduler            v1.14.1             8931473d5bdb        2 days ago          81.6 MB
k8s.gcr.io/etcd                      3.3.10              2c4adeb21b4f        4 months ago        258 MB
k8s.gcr.io/coredns                   1.3.1               367cdc8433a4        7 months ago        39.2 MB
k8s.gcr.io/pause                     3.1                 da86e6ba6ca1        15 months ago       742 kB

3.kubeadm輸出的主要信息，如下

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.222.135:6443 --token srbxk3.x6xo6nhv3a4ng08m \
    --discovery-token-ca-cert-hash sha256:b302232cbf1c5f3d418cea5553b641181d4bb384aadbce9b1d97b37cde477773

4.運行kubeadm配置

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

5.安裝網絡插件

kubectl apply -f "https://cloud.weave.works/k8s/net?k8s-version=$(kubectl version | base64 | tr -d '\n')"

6.確認是否安裝完成，查看pod內是否有weave-net即可

[root@master ~]# kubectl get pod --all-namespaces
NAMESPACE     NAME                             READY   STATUS    RESTARTS   AGE
kube-system   coredns-fb8b8dccf-glszh          1/1     Running   0          23m
kube-system   coredns-fb8b8dccf-xcmtx          1/1     Running   0          23m
kube-system   etcd-master                      1/1     Running   0          22m
kube-system   kube-apiserver-master            1/1     Running   0          22m
kube-system   kube-controller-manager-master   1/1     Running   0          22m
kube-system   kube-proxy-z84wh                 1/1     Running   0          23m
kube-system   kube-scheduler-master            1/1     Running   0          22m
kube-system   weave-net-phwjz                  2/2     Running   0          95s

加入node

1.在兩臺node上分別運行主要信息內的命令，如下（這個不能復制，需要查看自己的kubeadm輸出的信息）：

kubeadm join 192.168.222.135:6443 --token srbxk3.x6xo6nhv3a4ng08m \
    --discovery-token-ca-cert-hash sha256:b302232cbf1c5f3d418cea5553b641181d4bb384aadbce9b1d97b37cde477773

2.加入節點之后，發現node一直處于notready狀態，好糾結

[root@master bin]# kubectl get node
NAME     STATUS     ROLES    AGE    VERSION
master   Ready      master   167m   v1.14.1
node1    NotReady   <none>   142m   v1.14.1
node2    NotReady   <none>   142m   v1.14.1

3.查看pod節點，發現weave沒啟動

[root@master bin]# kubectl get pods --all-namespaces
NAMESPACE     NAME                             READY   STATUS              RESTARTS   AGE
kube-system   coredns-fb8b8dccf-glszh          1/1     Running             1          168m
kube-system   coredns-fb8b8dccf-xcmtx          1/1     Running             1          168m
kube-system   etcd-master                      1/1     Running             1          167m
kube-system   kube-apiserver-master            1/1     Running             1          167m
kube-system   kube-controller-manager-master   1/1     Running             1          167m
kube-system   kube-proxy-bq2rf                 0/1     ContainerCreating   0          143m
kube-system   kube-proxy-m8f7z                 0/1     ContainerCreating   0          143m
kube-system   kube-proxy-z84wh                 1/1     Running             1          168m
kube-system   kube-scheduler-master            1/1     Running             1          167m
kube-system   weave-net-8xmpx                  0/2     ContainerCreating   0          143m
kube-system   weave-net-phwjz                  2/2     Running             4          147m
kube-system   weave-net-xwqwm                  0/2     ContainerCreating   0          143m

4.使用describe pods發現報錯，沒有拉取鏡像，可是本機上已經有k8s.gcr.io/pause:3.1 鏡像了，在不懈的努力下，終于知道了，原來node節點上也需要該鏡像

kubectl describe pods --namespace=kube-system weave-net-8xmpx

Events:
  Type     Reason                  Age                   From            Message
  ----     ------                  ----                  ----            -------
  Warning  FailedCreatePodSandBox  77m (x8 over 120m)    kubelet, node2  Failed create pod sandbox: rpc error: code = Unknown desc = failed pulling image "k8s.gcr.io/pause:3.1": Get https://k8s.gcr.io/v1/_ping: dial tcp 64.233.189.82:443: connect: connection refused
  Warning  FailedCreatePodSandBox  32m (x9 over 91m)     kubelet, node2  Failed create pod sandbox: rpc error: code = Unknown desc = failed pulling image "k8s.gcr.io/pause:3.1": Get https://k8s.gcr.io/v1/_ping: dial tcp 64.233.188.82:443: connect: connection refused
  Warning  FailedCreatePodSandBox  22m (x23 over 133m)   kubelet, node2  Failed create pod sandbox: rpc error: code = Unknown desc = failed pulling image "k8s.gcr.io/pause:3.1": Get https://k8s.gcr.io/v1/_ping: dial tcp 108.177.97.82:443: connect: connection refused
  Warning  FailedCreatePodSandBox  17m (x56 over 125m)   kubelet, node2  Failed create pod sandbox: rpc error: code = Unknown desc = failed pulling image "k8s.gcr.io/pause:3.1": Get https://k8s.gcr.io/v1/_ping: dial tcp 74.125.203.82:443: connect: connection refused
  Warning  FailedCreatePodSandBox  12m (x24 over 110m)   kubelet, node2  Failed create pod sandbox: rpc error: code = Unknown desc = failed pulling image "k8s.gcr.io/pause:3.1": Get https://k8s.gcr.io/v1/_ping: dial tcp 74.125.204.82:443: connect: connection refused
  Warning  FailedCreatePodSandBox  2m31s (x20 over 96m)  kubelet, node2  Failed create pod sandbox: rpc error: code = Unknown desc = failed pulling image "k8s.gcr.io/pause:3.1": Get https://k8s.gcr.io/v1/_ping: dial tcp 108.177.125.82:443: connect: connection refused

5.node節點下載該鏡像，分別運行以下命令，執行后發現還需要k8s.gcr.io/kube-proxy:v1.14.1 該鏡像，那么一起處理吧（pull的鏡像版本可以自己改，不改的話根據我的命令執行也可以）。

docker pull mirrorgooglecontainers/pause:3.1
docker tag docker.io/mirrorgooglecontainers/pause:3.1  k8s.gcr.io/pause:3.1
docker pull mirrorgooglecontainers/kube-proxy-amd64:v1.11.3
docker tag docker.io/mirrorgooglecontainers/kube-proxy-amd64:v1.11.3 k8s.gcr.io/kube-proxy:v1.14.1

6.大功告成
k8s,Kubernetes環境搭建，集群搭建，1個mster，2個node

創建一個pod測試

1.配置一個yml文件

vim nginx.yml
apiVersion: v1
kind: Pod
metadata:
  name: nginx
  labels:
    app: web
spec:
  containers:
  - name: nginx
    image: nginx
    ports:
    - containerPort: 80

2.創建pod

kubectl create -f nginx.yml

3.查看IP并訪問

[root@master ~]# kubectl get pod -o wide
NAME    READY   STATUS    RESTARTS   AGE     IP          NODE    NOMINATED NODE   READINESS GATES
nginx   1/1     Running   0          4m11s   10.44.0.1   node1   <none>           <none>

[root@master ~]# curl 10.44.0.1
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
    body {
        width: 35em;
        margin: 0 auto;
        font-family: Tahoma, Verdana, Arial, sans-serif;
    }
</style>
</head>
<body>
<h2>Welcome to nginx!</h2>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>

<p>For online documentation and support please refer to
<a >nginx.org</a>.<br/>
Commercial support is available at
<a >nginx.com</a>.</p>

<p><em>Thank you for using nginx.</em></p>
</body>
</html>

感謝大家觀看

向AI問一下細節

免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。

AI
助
手
龙泉市| 维西| 车险| 扎赉特旗| 黄浦区| 靖安县| 昌都县| 郴州市| 芦溪县| 富阳市| 吴桥县| 全州县| 新民市| 大邑县| 柳林县| 沅江市| 琼中| 庆阳市| 瓦房店市| 牡丹江市| 土默特右旗| 出国| 那曲县| 伽师县| 博乐市| 贡觉县| 大新县| 洪泽县| 玉田县| 泸西县| 南阳市| 衡东县| 大石桥市| 玛纳斯县| 禹州市| 松原市| 烟台市| 罗平县| 赤城县| 淄博市| 岳池县|