溫馨提示×
您好，登錄后才能下訂單哦！
點擊 登錄注冊 即表示同意《億速云用戶服務條款》
您好，登錄后才能下訂單哦！
Linux系統下的redis的主從配置方法非常簡單，下面給大家分享一下redis的主從配置方法具體的操作步驟
環境介紹：
OS：oracle linux 5.6
redis:redis-2.6.8
master rac1 192.168.2.101
slave rac2 192.168.2.102
下載地址：
http://redis.googlecode.com/files/redis-2.6.8.tar.gz
安裝配置主從redis
1. 主節點配置
[root@rac1 opt] tar zxvf redis-2.6.8.tar.gz [root@rac1 opt] cd redis-2.6.8 [root@rac1 redis-2.6.8]# make [root@rac1 redis-2.6.8]# cp src/redis-server /usr/local/bin/ [root@rac1 redis-2.6.8]# cp redis.conf /etc/redis_master.conf [root@rac1 redis-2.6.8]# cat /etc/redis_master.conf # If port 0 is specified Redis will not listen on a TCP socket.
port 6379 #此端口是redis默認的，可以不改
復制軟件到從節點
[root@rac1 opt]# scp -r redis-2.6.8 rac2:/opt
2. 從節點配置
[root@rac2 redis-2.6.8]# cp src/redis-server /usr/local/bin/ [root@rac2 redis-2.6.8]# cp redis.conf /etc/redis_slave.conf # If port 0 is specified Redis will not listen on a TCP socket.
port 6389 #修改為slave節點的自定義端口
# slaveof <masterip> <masterport> slaveof 192.168.2.101 6379
此步最關鍵，添加上master的IP或主機及端口號
3. 啟動redis服務
啟動master節點
[root@rac1 ~]# redis-server /etc/redis_master.conf > redis_master.log 2>&1 &
&可以使命令在后臺的執行，不影響屏幕使用。
_._
_.-``__ ''-._
_.-`` `. `_. ''-._ Redis 2.6.8 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ''-._
( ' , .-` | `, ) Running in stand alone mode
|`-._`-...-` __...-.``-._|'` _.-'| Port: 6379
| `-._ `._ / _.-' | PID: 477
`-._ `-._ `-./ _.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' | http://redis.io
`-._ `-._`-.__.-'_.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' |
`-._ `-._`-.__.-'_.-' _.-'
`-._ `-.__.-' _.-'
`-._ _.-'
`-.__.-'
[477] 12 Mar 16:43:30.319 # Server started, Redis version 2.6.8
[477] 12 Mar 16:43:30.319 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect.
[477] 12 Mar 16:43:30.319 * The server is now ready to accept connections on port 6379
[root@rac1 ~]# ps -ef|grep redis
root 5930 14334 0 16:56 pts/1 00:00:02 redis-server /etc/redis_master.conf
root 7250 14334 0 17:03 pts/1 00:00:00 grep redis
啟動slave節點
[root@rac2 ~]# redis-server /etc/redis_slave.conf > redis_slave.log 2>&1 &
[1] 32507
[32507] 12 Mar 17:51:55.346 * Max number of open files set to 10032
_._
_.-``__ ''-._
_.-`` `. `_. ''-._ Redis 2.6.8 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ''-._
( ' , .-` | `, ) Running in stand alone mode
|`-._`-...-` __...-.``-._|'` _.-'| Port: 6389
| `-._ `._ / _.-' | PID: 32507
`-._ `-._ `-./ _.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' | http://redis.io
`-._ `-._`-.__.-'_.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' |
`-._ `-._`-.__.-'_.-' _.-'
`-._ `-.__.-' _.-'
`-._ _.-'
`-.__.-'
[32507] 12 Mar 17:51:55.350 # Server started, Redis version 2.6.8
[32507] 12 Mar 17:51:55.350 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect.
[32507] 12 Mar 17:51:55.350 * The server is now ready to accept connections on port 6389
[32507] 12 Mar 17:51:56.348 * Connecting to MASTER...
[32507] 12 Mar 17:51:56.349 * MASTER <-> SLAVE sync started
[32507] 12 Mar 17:51:56.495 * Non blocking connect for SYNC fired the event.
[32507] 12 Mar 17:51:57.014 * Master replied to PING, replication can continue...
[32507] 12 Mar 17:51:57.028 * MASTER <-> SLAVE sync: receiving 18 bytes from master
[32507] 12 Mar 17:51:57.029 * MASTER <-> SLAVE sync: Loading DB in memory
[32507] 12 Mar 17:51:57.037 * MASTER <-> SLAVE sync: Finished with success
[root@rac2 ~]# ps -ef|grep redis
root 321 29770 0 17:54 pts/1 00:00:00 grep redis
root 32507 29770 0 17:51 pts/1 00:00:00 redis-server /etc/redis_slave.conf
4. 驗證主從復制
master節點數據輸入
[root@rac1 ~]# telnet 192.168.2.101 6379 Trying 192.168.2.101... Connected to rac1.localdomain (192.168.2.101). Escape character is '^]'. rpush data 1 :1 rpush data 1 :2 lrange data 0 -1 *2 $1 1 $1 1
slave節點驗證
[root@rac1 ~]# telnet 192.168.2.102 6389 Trying 192.168.2.102... Connected to rac2.localdomain (192.168.2.102). Escape character is '^]'. lrange data 0 -1 *2 $1 1 $1 1 quit +OK Connection closed by foreign host.
好了，到此主從redis已經配置完成并成功運行了，Linux系統下的redis主從配置方法操作很簡單只要接步驟認真配置基本都可以配置成功
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
