溫馨提示×
您好，登錄后才能下訂單哦！
點擊 登錄注冊 即表示同意《億速云用戶服務條款》
您好，登錄后才能下訂單哦！
官方文檔對于dex中的class數據結構表示如下：
基本上就是這樣了,再看
public DexBackedClassDef(@Nonnull DexBackedDexFile dexFile,
int classDefOffset) {
this.dexFile = dexFile;
//classDefOffset 是這個類結構體在dex文件中的偏移地址。
this.classDefOffset = classDefOffset;
//獲取類的數據部分的偏移
int classDataOffset = dexFile.readSmallUint(classDefOffset + ClassDefItem.CLASS_DATA_OFFSET);
if (classDataOffset == 0) {
staticFieldsOffset = -1;
staticFieldCount = 0;
instanceFieldCount = 0;
directMethodCount = 0;
virtualMethodCount = 0;
} else {
//如果不等于0，則要讀取各種變量，方法的個數 保存到這個類的私有成員變量中，等到實際解析的時候
//再來使用
DexReader reader = dexFile.readerAt(classDataOffset);
staticFieldCount = reader.readSmallUleb128();
instanceFieldCount = reader.readSmallUleb128();
directMethodCount = reader.readSmallUleb128();
virtualMethodCount = reader.readSmallUleb128();
staticFieldsOffset = reader.getOffset();
}
}這里再列出來 dex文件關于 class類數據的格式說明，以方便讀者對代碼的理解
ok 我們再回到
List<? extends ClassDef> classDefs = Ordering.natural().sortedCopy(dexFile.getClasses());
這條語句，通過對里面機制的了解，已經知道，其實這條語句完成以后，
List<? extends ClassDef> classDefs 這個變量已經保存了 dex文件中關于類的各種信息。
故事2
return disassembleClass(classDef, fileNameHandler, options);
private static boolean disassembleClass(ClassDef classDef, ClassFileNameHandler fileNameHandler,
baksmaliOptions options) {
//獲取類名
String classDescriptor = classDef.getType();
//validate that the descriptor is formatted like we expect
if (classDescriptor.charAt(0) != 'L' ||
classDescriptor.charAt(classDescriptor.length()-1) != ';') {
System.err.println("Unrecognized class descriptor - " + classDescriptor + " - skipping class");
return false;
}
//生成相應要輸入smali文件的位置信息
File smaliFile = fileNameHandler.getUniqueFilenameForClass(classDescriptor);
//create and initialize the top level string template
ClassDefinition classDefinition = new ClassDefinition(options, classDef); // 重點1
//write the disassembly
Writer writer = null;
try
{
File smaliParent = smaliFile.getParentFile();
if (!smaliParent.exists()) {
if (!smaliParent.mkdirs()) {
// check again, it's likely it was created in a different thread
if (!smaliParent.exists()) {
System.err.println("Unable to create directory " + smaliParent.toString() + " - skipping class");
return false;
}
}
}
if (!smaliFile.exists()){
if (!smaliFile.createNewFile()) {
System.err.println("Unable to create file " + smaliFile.toString() + " - skipping class");
return false;
}
}
BufferedWriter bufWriter = new BufferedWriter(new OutputStreamWriter(
new FileOutputStream(smaliFile), "UTF8"));
writer = new IndentingWriter(bufWriter);
classDefinition.writeTo((IndentingWriter)writer); //重點2
} catch (Exception ex) {
System.err.println("\n\nError occurred while disassembling class " + classDescriptor.replace('/', '.') + " - skipping class");
ex.printStackTrace();
// noinspection ResultOfMethodCallIgnored
smaliFile.delete();
return false;
}
finally
{
if (writer != null) {
try {
writer.close();
} catch (Throwable ex) {
System.err.println("\n\nError occurred while closing file " + smaliFile.toString());
ex.printStackTrace();
}
}
}
return true;
} 這個函數有兩個重點
ClassDefinition classDefinition = new ClassDefinition(options, classDef); // 重點1
classDefinition.writeTo((IndentingWriter)writer); //重點2
其實這兩個重點調用完成以后，整個smali文件就已經生成了，所以我們就順著前面的腳步跟進去，看看這兩個重點到底做了什么事情
1 構造函數將 classdef 傳入到 ClassDefinition 這個類中
public ClassDefinition(@Nonnull baksmaliOptions options, @Nonnull ClassDef classDef) {
this.options = options;
this.classDef = classDef;
fieldsSetInStaticConstructor = findFieldsSetInStaticConstructor();
}
2 writeTo 將生成smali文件的各個元素給寫入到 IndentingWriter writer 代表的smali文件中。
public void writeTo(IndentingWriter writer) throws IOException {
writeClass(writer);
writeSuper(writer);
writeSourceFile(writer);
writeInterfaces(writer);
writeAnnotations(writer);
Set<String> staticFields = writeStaticFields(writer);
writeInstanceFields(writer, staticFields);
Set<String> directMethods = writeDirectMethods(writer);
writeVirtualMethods(writer, directMethods);
}
到這里baksmali 源碼的分析，大體框架已經完成。
當然還有很多細節了，其實主要涉及在 public void writeTo(IndentingWriter writer) 這個函數里面
我們舉一個比較復雜的例子 Set<String> directMethods = writeDirectMethods(writer); 來代碼跟蹤一邊，看看里面的做了什么，
基本上就搞清楚 里面做的事情了
private Set<String> writeDirectMethods(IndentingWriter writer) throws IOException {
boolean wroteHeader = false;
Set<String> writtenMethods = new HashSet<String>();
Iterable<? extends Method> directMethods;
if (classDef instanceof DexBackedClassDef) {
directMethods = ((DexBackedClassDef)classDef).getDirectMethods(false); //重點1
} else {
directMethods = classDef.getDirectMethods();
}
for (Method method: directMethods) {
if (!wroteHeader) {
writer.write("\n\n");
writer.write("# direct methods");
wroteHeader = true;
}
writer.write('\n');
...
MethodImplementation methodImpl = method.getImplementation();
if (methodImpl == null) {
MethodDefinition.writeEmptyMethodTo(methodWriter, method, options);
} else {
MethodDefinition methodDefinition = new MethodDefinition(this, method, methodImpl); //重點2
methodDefinition.writeTo(methodWriter); //重點3
}
}
return writtenMethods;
}
這個函數有三個重點
directMethods = ((DexBackedClassDef)classDef).getDirectMethods(false); //重點1
public Iterable<? extends DexBackedMethod> getDirectMethods(final boolean skipDuplicates) {
if (directMethodCount > 0) {
//首先得到這個類中的 direct 方法的在dex文件中的偏移地址
DexReader reader = dexFile.readerAt(getDirectMethodsOffset());
final AnnotationsDirectory annotationsDirectory = getAnnotationsDirectory();
final int methodsStartOffset = reader.getOffset();
//返回 new Iterable<DexBackedMethod>()給上層的調用函數，并且繼承實現了
//iterator() 這個函數
return new Iterable<DexBackedMethod>() {
@Nonnull
@Override
public Iterator<DexBackedMethod> iterator() {
final AnnotationsDirectory.AnnotationIterator methodAnnotationIterator =
annotationsDirectory.getMethodAnnotationIterator();
final AnnotationsDirectory.AnnotationIterator parameterAnnotationIterator =
annotationsDirectory.getParameterAnnotationIterator();
//返回了 new VariableSizeLookaheadIterator<DexBackedMethod>(dexFile, methodsStartOffset)
//這個對象，里面繼承實現了 readNextItem 這個方法，這個方法通過傳入的 方法開始偏移，從
//dex文件中 返回 DexBackedMethod 這個對象給上層
return new VariableSizeLookaheadIterator<DexBackedMethod>(dexFile, methodsStartOffset) {
private int count;
@Nullable private MethodReference previousMethod;
private int previousIndex;
@Nullable
@Override
protected DexBackedMethod readNextItem(@Nonnull DexReader reader) {
while (true) {
if (++count > directMethodCount) {
virtualMethodsOffset = reader.getOffset();
return null;
}
// 生成一個 method的對象
DexBackedMethod item = new DexBackedMethod(reader, DexBackedClassDef.this,
previousIndex, methodAnnotationIterator, parameterAnnotationIterator); //重點1
MethodReference currentMethod = previousMethod;
MethodReference nextMethod = ImmutableMethodReference.of(item);
previousMethod = nextMethod;
previousIndex = item.methodIndex;
if (skipDuplicates && currentMethod != null && currentMethod.equals(nextMethod)) {
continue;
}
return item;
}
}
};
}
};
} else {
if (directMethodsOffset > 0) {
virtualMethodsOffset = directMethodsOffset;
}
return ImmutableSet.of();
}
}
關于重點1
public DexBackedMethod(@Nonnull DexReader reader,
@Nonnull DexBackedClassDef classDef,
int previousMethodIndex,
@Nonnull AnnotationsDirectory.AnnotationIterator methodAnnotationIterator,
@Nonnull AnnotationsDirectory.AnnotationIterator paramaterAnnotationIterator) {
this.dexFile = reader.dexBuf;
this.classDef = classDef;
// large values may be used for the index delta, which cause the cumulative index to overflow upon
// addition, effectively allowing out of order entries.
int methodIndexDiff = reader.readLargeUleb128();
this.methodIndex = methodIndexDiff + previousMethodIndex;
this.accessFlags = reader.readSmallUleb128();
this.codeOffset = reader.readSmallUleb128();
this.methodAnnotationSetOffset = methodAnnotationIterator.seekTo(methodIndex);
this.parameterAnnotationSetListOffset = paramaterAnnotationIterator.seekTo(methodIndex);
}
根據官方文檔，encoded_method Format 這種格式的數據結構
其實這個構造函數就是將 數據結構中要求的索引從dex文件中找到，保存到自己的私有成員變量當中
重點2
MethodImplementation methodImpl = method.getImplementation();
public DexBackedMethodImplementation getImplementation() {
if (codeOffset > 0) {
return new DexBackedMethodImplementation(dexFile, this, codeOffset);
}
return null;
}
重點3
MethodDefinition methodDefinition = new MethodDefinition(this, method, methodImpl);
public MethodDefinition(@Nonnull ClassDefinition classDef, @Nonnull Method method,
@Nonnull MethodImplementation methodImpl) {
this.classDef = classDef;
this.method = method;
this.methodImpl = methodImpl;
//這里傳入的method其實是 DexBackedMethod
try {
//TODO: what about try/catch blocks inside the dead code? those will need to be commented out too. ugh.
//methodImpl.getInstructions() 其實是調用的是 public Iterable<? extends Instruction> getInstructions()
// 在 DexBackedMethodImplementation 這個類中實現的，主要是根據前面的偏移從dex文件中讀取相應的指令數據
//放在指令列表中
instructions = ImmutableList.copyOf(methodImpl.getInstructions());
methodParameters = ImmutableList.copyOf(method.getParameters());
packedSwitchMap = new SparseIntArray(0);
sparseSwitchMap = new SparseIntArray(0);
instructionOffsetMap = new InstructionOffsetMap(instructions);
for (int i=0; i<instructions.size(); i++) {
Instruction instruction = instructions.get(i);
//處理switch case 指令
Opcode opcode = instruction.getOpcode();
if (opcode == Opcode.PACKED_SWITCH) {
boolean valid = true;
int codeOffset = instructionOffsetMap.getInstructionCodeOffset(i);
int targetOffset = codeOffset + ((OffsetInstruction)instruction).getCodeOffset();
try {
targetOffset = findSwitchPayload(targetOffset, Opcode.PACKED_SWITCH_PAYLOAD);
} catch (InvalidSwitchPayload ex) {
valid = false;
}
if (valid) {
packedSwitchMap.append(targetOffset, codeOffset);
}
} else if (opcode == Opcode.SPARSE_SWITCH) {
boolean valid = true;
int codeOffset = instructionOffsetMap.getInstructionCodeOffset(i);
int targetOffset = codeOffset + ((OffsetInstruction)instruction).getCodeOffset();
try {
targetOffset = findSwitchPayload(targetOffset, Opcode.SPARSE_SWITCH_PAYLOAD);
} catch (InvalidSwitchPayload ex) {
valid = false;
// The offset to the payload instruction was invalid. Nothing to do, except that we won't
// add this instruction to the map.
}
if (valid) {
sparseSwitchMap.append(targetOffset, codeOffset);
}
}
}
}catch (Exception ex) {
String methodString;
try {
methodString = ReferenceUtil.getMethodDescriptor(method);
} catch (Exception ex2) {
throw ExceptionWithContext.withContext(ex, "Error while processing method");
}
throw ExceptionWithContext.withContext(ex, "Error while processing method %s", methodString);
}
}
重點4
methodDefinition.writeTo(methodWriter);
這個函數其實也是十分復雜的一個函數，但是總體的思路，其實也是根據前面傳遞過來的數據，主要是索引值和偏移地址，來
將method里面的數據寫回到 smali文件中去
由于篇幅的關系，這里就不在那么細節的分析 method的writeTo了，在看 method的writeTo方法的時候，需要
仔細理解一下 parameterRegisterCount 這個局部變量的賦值情況。總體來說java代碼中非靜態方法會自動為該函數加入一個參數
其實這個參數就相當于 this指針的作用，由于dalvik虛擬機中的寄存器都是32位的，所以對于 J和D也就是 long和Double類型的
其實每個參數是用兩個寄存器表示的。
從下面的代碼也能看出來
for (MethodParameter parameter: methodParameters) {
String type = parameter.getType();
writer.write(type);
parameterRegisterCount++;
if (TypeUtils.isWideType(type)) {
parameterRegisterCount++;
}
}
理解參數占用的寄存器數量是如何計算出來以后，就能很好的理解smali代碼中關于p寄存器和v寄存器表示的規則了，并且為后續編寫dex文件為函數添加寄存器的功能打下基礎。
總之，baksmali對于寫方法來說，基本上是最復雜的操作了，在理解了寫入方法的操作以后，前面的操作的理解基本上應該不成問題。
到這里，基本上已經將baksmali的框架分析完成了。下一步 我們需要分析 smali框架了源代碼了
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
